Tap WaterIndex

← Pennsylvania

Tap water quality report

Blairsville Muni Auth

EPA monitoring tested this supplier for 109 contaminants and detected 15. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

109
contaminants tested
15
detected
4,023
people served
17
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Surface water
Ownership
Local government
Counties served
Indiana

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

17
health-based violations
614
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2023-09-30
TT Health-based Resolved 2023-09-30
TT Health-based Resolved 2023-09-30
TT Health-based Resolved 2017-06-20
TT Health-based Resolved 2017-06-20
TT Health-based Resolved 2017-06-20
TT Health-based Resolved 2017-06-20
TT Health-based Resolved 2017-06-20
TT Health-based Resolved 2017-06-20
TT Health-based Resolved 2017-05-01 → 2017-05-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
140 µg/L 11%
of the EPA limit 1300 µg/L
 70/183 SYR4 2012–2019
Chloroform
64 µg/L
No EPA limit set
 62/62 SYR4 2012–2019
Bromodichloromethane
12 µg/L
No EPA limit set
 56/56 SYR4 2012–2019
TTHM
78 µg/L 98%
of the EPA limit 80 µg/L
 56/56 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
30 µg/L 50%
of the EPA limit 60 µg/L
 55/59 SYR4 2012–2019
Dibromochloromethane
3 µg/L
No EPA limit set
 52/56 SYR4 2012–2019
Lead
21 µg/L 140%
of the EPA limit, in the worst sample — 15 µg/L
 21/183 SYR4 2012–2019
Lead
0.0072 mg/L 48%
of the EPA limit 0.0150 mg/L
 17/17 LCR 2025
Dichloroacetic Acid
16 µg/L
No EPA limit set
 12/12 SYR4 2012–2019
Trichloroacetic Acid
13 µg/L
No EPA limit set
 12/12 SYR4 2012–2019
Nitrate
220 µg/L 2.2%
of the EPA limit 10000 µg/L
 10/16 SYR4 2012–2019
Fluoride
1370 µg/L 34%
of the EPA limit 4000 µg/L
 7/8 SYR4 2012–2019
Monochloroacetic Acid
3.09 µg/L
No EPA limit set
 3/12 SYR4 2012–2019
Barium
46 µg/L 2.3%
of the EPA limit 2000 µg/L
 1/8 SYR4 2012–2019
Nitrite
110 µg/L 11%
of the EPA limit 1000 µg/L
 1/8 SYR4 2012–2019
94 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
JODY POORBAUGH
Phone
724-459-9100

Frequently asked questions about Blairsville Muni Auth

Is Blairsville Muni Auth tap water safe to drink?

EPA monitoring detected 15 contaminants in Blairsville Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Blairsville Muni Auth's water?

EPA monitoring detected Copper, Chloroform, Bromodichloromethane, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Blairsville Muni Auth serve?

Blairsville Muni Auth reports serving 4,023 people in Pennsylvania, per its EPA record.

Has Blairsville Muni Auth had any water quality violations?

The EPA has 614 violations on file for Blairsville Muni Auth, of which 17 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.