Tap WaterIndex

← Pennsylvania

Tap water quality report

Albert Gallatin Muni Auth

EPA monitoring tested this supplier for 81 contaminants and detected 15. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

81
contaminants tested
15
detected
2,695
people served
90
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Surface water
Ownership
Local government
Counties served
Fayette

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

90
health-based violations
285
violations on file
2
still open
ViolationTypeStatusPeriod
TT Health-based Unaddressed 2025-08-17
TT Health-based Unaddressed 2025-08-17
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31
MCL Health-based Resolved 2020-01-01 → 2020-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Chloroform
152.16 µg/L
No EPA limit set
 52/52 SYR4 2012–2019
TTHM
160.96 µg/L 201%
of the EPA limit, in the worst sample — 80 µg/L
 52/52 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
159 µg/L 265%
of the EPA limit, in the worst sample — 60 µg/L
 52/52 SYR4 2012–2019
Bromodichloromethane
10.4 µg/L
No EPA limit set
 51/52 SYR4 2012–2019
Copper
772 µg/L 59%
of the EPA limit 1300 µg/L
 40/40 SYR4 2013–2019
Dichloroacetic Acid
83 µg/L
No EPA limit set
 14/14 SYR4 2015–2019
Trichloroacetic Acid
76 µg/L
No EPA limit set
 14/14 SYR4 2015–2019
Barium
48 µg/L 2.4%
of the EPA limit 2000 µg/L
 7/8 SYR4 2012–2019
Fluoride
1110 µg/L 28%
of the EPA limit 4000 µg/L
 5/8 SYR4 2012–2019
Monochloroacetic Acid
50 µg/L
No EPA limit set
 5/14 SYR4 2015–2019
Dibromoacetic Acid
0.4700 µg/L
No EPA limit set
 2/14 SYR4 2015–2019
Lead
0.0010 mg/L 6.7%
of the EPA limit 0.0150 mg/L
 2/2 LCR 1994
Nitrate
2850 µg/L 28%
of the EPA limit 10000 µg/L
 2/16 SYR4 2012–2019
Dibromochloromethane
2.67 µg/L
No EPA limit set
 1/52 SYR4 2012–2019
Hexachlorocyclopentadiene
0.3000 µg/L 0.6%
of the EPA limit 50 µg/L
 1/12 SYR4 2014–2019
66 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,3,7,8-TCDD2,4,5-TP2,4-DAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateGross Beta Particle ActivityHexachlorobenzeneHeptachlorHeptachlor EpoxideLassoLeadMercuryMethoxychlorMonobromoacetic AcidNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
MELISSA KINZEY
Phone
724-725-3686

Frequently asked questions about Albert Gallatin Muni Auth

Is Albert Gallatin Muni Auth tap water safe to drink?

EPA monitoring detected 15 contaminants in Albert Gallatin Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Albert Gallatin Muni Auth's water?

EPA monitoring detected Chloroform, TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Copper, and others. The full list with the level and data source for each is above.

How many people does Albert Gallatin Muni Auth serve?

Albert Gallatin Muni Auth reports serving 2,695 people in Pennsylvania, per its EPA record.

Has Albert Gallatin Muni Auth had any water quality violations?

The EPA has 285 violations on file for Albert Gallatin Muni Auth, of which 90 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.