Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2025-10-01 |
| TT | Health-based | Resolved | 2025-10-01 |
| TT | Health-based | Resolved | 2025-10-01 |
| TT | Health-based | Resolved | 2025-10-01 |
| TT | Health-based | Resolved | 2016-08-01 → 2016-08-31 |
| TT | Health-based | Resolved | 2016-08-01 → 2016-08-31 |
| MCL | Health-based | Resolved | 2014-08-01 → 2014-08-31 |
| MCL | Health-based | Resolved | 2014-08-01 → 2014-08-31 |
| MCL | Health-based | Resolved | 2012-07-01 → 2012-07-31 |
| MCL | Health-based | Resolved | 2012-07-01 → 2012-07-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chlorite | 904.2 µg/L 90% of the EPA limit 1000 µg/L
worst single sample: 999 µg/L | 2117/2126 | SYR4 | 2012–2017 |
| Copper | 154.3 µg/L 12% of the EPA limit 1300 µg/L
worst single sample: 660 µg/L | 159/192 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 55.825 µg/L 93% of the EPA limit 60 µg/L
worst single sample: 73.8 µg/L | 46/46 | SYR4 | 2012–2019 |
| Bromodichloromethane | 22.37 µg/L No EPA limit set
worst single sample: 39 µg/L | 43/46 | SYR4 | 2012–2019 |
| Chloroform | 75.73 µg/L No EPA limit set
worst single sample: 126 µg/L | 43/46 | SYR4 | 2012–2019 |
| TTHM | 100.66 µg/L 126% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 140 µg/L | 43/46 | SYR4 | 2012–2019 |
| Dibromochloromethane | 16.075 µg/L No EPA limit set
worst single sample: 36 µg/L | 26/46 | SYR4 | 2012–2019 |
| Lead | 0.0018 mg/L 12% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Dichloroacetic Acid | 16.12 µg/L No EPA limit set
worst single sample: 16.9 µg/L | 14/14 | SYR4 | 2015–2019 |
| Lead | 108 µg/L 720% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 120 µg/L | 13/170 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 46.66 µg/L No EPA limit set
worst single sample: 48.4 µg/L | 13/14 | SYR4 | 2015–2019 |
| Bromoform | 9.05 µg/L No EPA limit set
worst single sample: 11 µg/L | 6/46 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 1.3125 µg/L No EPA limit set
worst single sample: 1.34 µg/L | 6/14 | SYR4 | 2015–2019 |
| Dibromoacetic Acid | 9.25 µg/L No EPA limit set
worst single sample: 10 µg/L | 4/14 | SYR4 | 2015–2019 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Belle Vernon Boro Muni Auth
Is Belle Vernon Boro Muni Auth tap water safe to drink?
EPA monitoring detected 14 contaminants in Belle Vernon Boro Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Belle Vernon Boro Muni Auth's water?
EPA monitoring detected Chlorite, Copper, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Belle Vernon Boro Muni Auth serve?
Belle Vernon Boro Muni Auth reports serving 6,000 people in Pennsylvania, per its EPA record.
Has Belle Vernon Boro Muni Auth had any water quality violations?
The EPA has 522 violations on file for Belle Vernon Boro Muni Auth, of which 16 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.