Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2012-05-01 → 2012-05-31 |
| TT | Health-based | Resolved | 2012-05-01 → 2012-05-31 |
| TT | Health-based | Resolved | 2012-05-01 → 2012-05-31 |
| Other | Monitoring | Resolved | 2025-07-11 |
| Other | Monitoring | Resolved | 2025-07-11 |
| Other | Monitoring | Resolved | 2025-07-11 |
| MR | Monitoring | Resolved | 2024-06-01 → 2024-06-30 |
| MR | Monitoring | Resolved | 2024-06-01 → 2024-06-30 |
| MR | Monitoring | Resolved | 2023-03-01 → 2023-03-31 |
| MR | Monitoring | Resolved | 2023-03-01 → 2023-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 830 µg/L 64% of the EPA limit 1300 µg/L | 50/50 | SYR4 | 2012–2019 |
| Bromodichloromethane | 9.6 µg/L No EPA limit set | 12/12 | SYR4 | 2013–2019 |
| Chloroform | 9.44 µg/L No EPA limit set | 12/12 | SYR4 | 2013–2019 |
| Dibromochloromethane | 11.8 µg/L No EPA limit set | 12/12 | SYR4 | 2013–2019 |
| Bromoform | 4.2 µg/L No EPA limit set | 11/12 | SYR4 | 2013–2019 |
| TTHM | 30.2 µg/L 38% of the EPA limit 80 µg/L | 10/10 | SYR4 | 2013–2019 |
| cis-1,2-Dichloroethylene | 3.48 µg/L 5% of the EPA limit 70 µg/L | 8/8 | SYR4 | 2012–2019 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 4/4 | LCR | 1996 |
| Lead | 14 µg/L 93% of the EPA limit 15 µg/L | 4/50 | SYR4 | 2012–2019 |
| Nitrate | 160 µg/L 1.6% of the EPA limit 10000 µg/L | 4/16 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 11 µg/L 18% of the EPA limit 60 µg/L | 4/10 | SYR4 | 2013–2019 |
| Barium | 220 µg/L 11% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Fluoride | 260 µg/L 6.5% of the EPA limit 4000 µg/L | 2/3 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 2.52 µg/L No EPA limit set | 1/1 | SYR4 | 2019 |
| Dichloroacetic Acid | 3.8 µg/L No EPA limit set | 1/1 | SYR4 | 2019 |
| Monochloroacetic Acid | 2.33 µg/L No EPA limit set | 1/1 | SYR4 | 2019 |
| Trichloroacetic Acid | 1.56 µg/L No EPA limit set | 1/1 | SYR4 | 2019 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Mars Borough Water Works
Is Mars Borough Water Works tap water safe to drink?
EPA monitoring detected 17 contaminants in Mars Borough Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mars Borough Water Works's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Mars Borough Water Works serve?
Mars Borough Water Works reports serving 1,956 people in Pennsylvania, per its EPA record.
Has Mars Borough Water Works had any water quality violations?
The EPA has 562 violations on file for Mars Borough Water Works, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.