Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2025-03-15 |
| TT | Health-based | Unaddressed | 2025-03-15 |
| MRDL | Health-based | Resolved | 2013-04-01 → 2013-06-30 |
| MR | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
| MR | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
| MR | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
| MR | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
| MR | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
| MR | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
| MR | Monitoring | Resolved | 2025-10-01 → 2025-10-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 559 µg/L 43% of the EPA limit 1300 µg/L | 14/15 | SYR4 | 2013–2019 |
| Nitrate | 1240 µg/L 12% of the EPA limit 10000 µg/L | 8/14 | SYR4 | 2012–2018 |
| Lead | 18 µg/L 120% of the EPA limit, in the worst sample — 15 µg/L | 7/15 | SYR4 | 2013–2019 |
| Bromodichloromethane | 6.6 µg/L No EPA limit set | 3/3 | SYR4 | 2014–2019 |
| Chloroform | 5.6 µg/L No EPA limit set | 3/3 | SYR4 | 2014–2019 |
| Dibromochloromethane | 6 µg/L No EPA limit set | 3/3 | SYR4 | 2014–2019 |
| TTHM | 18.3 µg/L 23% of the EPA limit 80 µg/L | 3/3 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 13 µg/L 22% of the EPA limit 60 µg/L | 3/3 | SYR4 | 2014–2019 |
| Barium | 51.5 µg/L 2.6% of the EPA limit 2000 µg/L | 2/2 | SYR4 | 2012–2015 |
| Bromoform | 1.7 µg/L No EPA limit set | 2/3 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 2 µg/L No EPA limit set | 2/2 | SYR4 | 2018–2019 |
| Dichloroacetic Acid | 6.1 µg/L No EPA limit set | 2/2 | SYR4 | 2018–2019 |
| Trichloroacetic Acid | 4.6 µg/L No EPA limit set | 2/2 | SYR4 | 2018–2019 |
| Chromium | 5 µg/L 5% of the EPA limit 100 µg/L | 1/2 | SYR4 | 2012–2015 |
| Fluoride | 100 µg/L 2.5% of the EPA limit 4000 µg/L | 1/3 | SYR4 | 2012–2018 |
| Lead | 0.0200 mg/L 133% above the EPA limit of 0.0150 mg/L | 1/1 | LCR | 1993 |
| Monochloroacetic Acid | 0.7000 µg/L No EPA limit set | 1/2 | SYR4 | 2018–2019 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Glasgow Municipal Water Works
Is Glasgow Municipal Water Works tap water safe to drink?
EPA monitoring detected 17 contaminants in Glasgow Municipal Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Glasgow Municipal Water Works's water?
EPA monitoring detected Copper, Nitrate, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Glasgow Municipal Water Works serve?
Glasgow Municipal Water Works reports serving 51 people in Pennsylvania, per its EPA record.
Has Glasgow Municipal Water Works had any water quality violations?
The EPA has 1084 violations on file for Glasgow Municipal Water Works, of which 3 are health-based (a contaminant limit or required treatment was breached) and 58 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.