Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2024-03-01 → 2024-03-31 |
| MR | Monitoring | Resolved | 2024-03-01 → 2024-03-31 |
| MR | Monitoring | Resolved | 2024-03-01 → 2024-03-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 288 µg/L 22% of the EPA limit 1300 µg/L | 29/30 | SYR4 | 2013–2019 |
| Nitrate | 2790 µg/L 28% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1200 µg/L No EPA limit set | 10/10 | SYR4 | 2013–2019 |
| Bromoform | 3100 µg/L No EPA limit set | 10/10 | SYR4 | 2013–2019 |
| Dibromochloromethane | 3000 µg/L No EPA limit set | 10/10 | SYR4 | 2013–2019 |
| TTHM | 14.3 µg/L 18% of the EPA limit 80 µg/L | 10/10 | SYR4 | 2013–2019 |
| Chloroform | 1.92 µg/L No EPA limit set | 7/10 | SYR4 | 2013–2019 |
| 1,1,1-Trichloroethane | 3.47 µg/L 1.7% of the EPA limit 200 µg/L | 5/32 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 3.44 µg/L 5.7% of the EPA limit 60 µg/L | 5/9 | SYR4 | 2013–2019 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 4/4 | LCR | 1995 |
| Dibromoacetic Acid | 1500 µg/L No EPA limit set | 2/2 | SYR4 | 2018–2019 |
| Tetrachloroethylene | 0.5400 µg/L 11% of the EPA limit 5 µg/L | 2/29 | SYR4 | 2012–2019 |
| Barium | 99.3 µg/L 5% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2012 |
| Lead | 3 µg/L 20% of the EPA limit 15 µg/L | 1/30 | SYR4 | 2013–2019 |
| Trichloroethylene | 0.5400 µg/L 11% of the EPA limit 5 µg/L | 1/28 | SYR4 | 2012–2019 |
37 contaminants tested, none detected
Utility contact
Frequently asked questions about Vanport Twp Muni Auth
Is Vanport Twp Muni Auth tap water safe to drink?
EPA monitoring detected 15 contaminants in Vanport Twp Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Vanport Twp Muni Auth's water?
EPA monitoring detected Copper, Nitrate, Bromodichloromethane, Bromoform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Vanport Twp Muni Auth serve?
Vanport Twp Muni Auth reports serving 2,000 people in Pennsylvania, per its EPA record.
Has Vanport Twp Muni Auth had any water quality violations?
The EPA has 202 violations on file for Vanport Twp Muni Auth, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.