Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Resolved | 2023-10-01 → 2023-12-31 |
| MCL | Health-based | Resolved | 2023-10-01 → 2023-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 155.5 µg/L 194% of the EPA limit, in the worst sample — 80 µg/L | 32/32 | SYR4 | 2012–2019 |
| Bromodichloromethane | 44 µg/L No EPA limit set | 31/31 | SYR4 | 2012–2019 |
| Chloroform | 91 µg/L No EPA limit set | 31/31 | SYR4 | 2012–2019 |
| Dibromochloromethane | 43.6 µg/L No EPA limit set | 31/31 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 92.4 µg/L 154% of the EPA limit, in the worst sample — 60 µg/L | 31/32 | SYR4 | 2012–2019 |
| Copper | 1400 µg/L 108% of the EPA limit, in the worst sample — 1300 µg/L | 30/30 | SYR4 | 2013–2019 |
| Lead | 8 µg/L 53% of the EPA limit 15 µg/L | 21/30 | SYR4 | 2013–2019 |
| Nitrate | 1700 µg/L 17% of the EPA limit 10000 µg/L | 12/12 | SYR4 | 2012–2019 |
| Bromoform | 9.89 µg/L No EPA limit set | 11/32 | SYR4 | 2012–2019 |
| Barium | 43.5 µg/L 2.2% of the EPA limit 2000 µg/L | 7/7 | SYR4 | 2012–2019 |
| Dalapon | 1.67 µg/L 0.8% of the EPA limit 200 µg/L | 5/10 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 1500 µg/L No EPA limit set | 5/6 | SYR4 | 2018–2019 |
| Dichloroacetic Acid | 24.7 µg/L No EPA limit set | 5/5 | SYR4 | 2018–2019 |
| Trichloroacetic Acid | 44.1 µg/L No EPA limit set | 5/5 | SYR4 | 2018–2019 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 4/4 | LCR | 1998 |
| Monobromoacetic Acid | 2500 µg/L No EPA limit set | 4/6 | SYR4 | 2018–2019 |
| Monochloroacetic Acid | 2300 µg/L No EPA limit set | 4/6 | SYR4 | 2018–2019 |
| Dichloromethane | 0.7580 µg/L 15% of the EPA limit 5 µg/L | 1/10 | SYR4 | 2012–2019 |
| Toluene | 0.7940 µg/L 0.1% of the EPA limit 1000 µg/L | 1/10 | SYR4 | 2012–2019 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about Midland Boro Muni Auth
Is Midland Boro Muni Auth tap water safe to drink?
EPA monitoring detected 19 contaminants in Midland Boro Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Midland Boro Muni Auth's water?
EPA monitoring detected TTHM, Bromodichloromethane, Chloroform, Dibromochloromethane, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Midland Boro Muni Auth serve?
Midland Boro Muni Auth reports serving 3,100 people in Pennsylvania, per its EPA record.
Has Midland Boro Muni Auth had any water quality violations?
The EPA has 926 violations on file for Midland Boro Muni Auth, of which 159 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.