Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2025-10-20 |
| TT | Health-based | Resolved | 2025-10-20 |
| TT | Health-based | Resolved | 2025-10-20 |
| TT | Health-based | Resolved | 2025-10-20 |
| TT | Health-based | Resolved | 2025-10-19 |
| TT | Health-based | Resolved | 2025-10-19 |
| TT | Health-based | Resolved | 2025-10-19 |
| TT | Health-based | Resolved | 2019-07-01 → 2019-07-31 |
| TT | Health-based | Resolved | 2019-07-01 → 2019-07-31 |
| TT | Health-based | Resolved | 2014-02-01 → 2014-02-28 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0057 µg/L | 1/2 | 2025 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1310 µg/L 101% of the EPA limit, in the worst sample — 1300 µg/L | 90/90 | SYR4 | 2013–2019 |
| Bromodichloromethane | 21.1 µg/L No EPA limit set | 78/78 | SYR4 | 2012–2019 |
| Dibromochloromethane | 26 µg/L No EPA limit set | 78/78 | SYR4 | 2012–2019 |
| TTHM | 65 µg/L 81% of the EPA limit 80 µg/L | 78/78 | SYR4 | 2012–2019 |
| Bromoform | 15 µg/L No EPA limit set | 77/77 | SYR4 | 2012–2019 |
| Chloroform | 18.1 µg/L No EPA limit set | 77/78 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 18 µg/L 30% of the EPA limit 60 µg/L | 59/78 | SYR4 | 2012–2019 |
| Lead | 48.6 µg/L 324% of the EPA limit, in the worst sample — 15 µg/L | 47/90 | SYR4 | 2013–2019 |
| Lead | 0.0335 mg/L 223% above the EPA limit of 0.0150 mg/L | 16/16 | LCR | 2024 |
| Nitrate | 775 µg/L 7.8% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.36 µg/L No EPA limit set | 2/2 | SYR4 | 2019 |
| Dichloroacetic Acid | 8.35 µg/L No EPA limit set | 2/2 | SYR4 | 2019 |
| Trichloroacetic Acid | 1.85 µg/L No EPA limit set | 2/2 | SYR4 | 2019 |
| Barium | 19.6 µg/L 1% of the EPA limit 2000 µg/L | 1/3 | SYR4 | 2012–2018 |
| Fluoride | 240 µg/L 6% of the EPA limit 4000 µg/L | 1/3 | SYR4 | 2012–2018 |
92 contaminants tested, none detected
Utility contact
Frequently asked questions about Mun Water Auth of Aliquippa
Is Mun Water Auth of Aliquippa tap water safe to drink?
EPA monitoring detected 16 contaminants in Mun Water Auth of Aliquippa's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mun Water Auth of Aliquippa's water?
EPA monitoring detected Copper, Bromodichloromethane, Dibromochloromethane, TTHM, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Mun Water Auth of Aliquippa serve?
Mun Water Auth of Aliquippa reports serving 15,685 people in Pennsylvania, per its EPA record.
Has Mun Water Auth of Aliquippa had any water quality violations?
The EPA has 288 violations on file for Mun Water Auth of Aliquippa, of which 13 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.