Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2025-10-01 → 2025-12-31 |
| MCL | Health-based | Archived | 2025-10-01 → 2025-12-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2021-10-01 → 2021-12-31 |
| MCL | Health-based | Resolved | 2021-10-01 → 2021-12-31 |
| MCL | Health-based | Resolved | 2021-10-01 → 2021-12-31 |
| MCL | Health-based | Resolved | 2021-10-01 → 2021-12-31 |
| MCL | Health-based | Resolved | 2021-10-01 → 2021-12-31 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0214 µg/L | 2/8 | 2023 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 44 µg/L No EPA limit set | 88/88 | SYR4 | 2012–2019 |
| TTHM | 146 µg/L 183% of the EPA limit, in the worst sample — 80 µg/L | 88/88 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 39 µg/L 65% of the EPA limit 60 µg/L | 88/88 | SYR4 | 2012–2019 |
| Dibromochloromethane | 44 µg/L No EPA limit set | 87/88 | SYR4 | 2012–2019 |
| Chloroform | 95 µg/L No EPA limit set | 86/86 | SYR4 | 2012–2019 |
| Copper | 160 µg/L 12% of the EPA limit 1300 µg/L | 54/62 | SYR4 | 2013–2019 |
| Bromoform | 16.8 µg/L No EPA limit set | 53/88 | SYR4 | 2012–2019 |
| Lead | 10.6 µg/L 71% of the EPA limit 15 µg/L | 19/62 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 20.8 µg/L No EPA limit set | 14/14 | SYR4 | 2013–2019 |
| Lead | 0.0012 mg/L 7.9% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Trichloroacetic Acid | 14.9 µg/L No EPA limit set | 12/14 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 4.11 µg/L No EPA limit set | 4/14 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 7.65 µg/L No EPA limit set | 2/14 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 2.52 µg/L No EPA limit set | 2/14 | SYR4 | 2013–2019 |
29 contaminants tested, none detected
Utility contact
Frequently asked questions about Fawn Frazer Jt Water Auth
Is Fawn Frazer Jt Water Auth tap water safe to drink?
EPA monitoring detected 15 contaminants in Fawn Frazer Jt Water Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fawn Frazer Jt Water Auth's water?
EPA monitoring detected Bromodichloromethane, TTHM, Total Haloacetic Acids (HAA5), Dibromochloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Fawn Frazer Jt Water Auth serve?
Fawn Frazer Jt Water Auth reports serving 4,650 people in Pennsylvania, per its EPA record.
Has Fawn Frazer Jt Water Auth had any water quality violations?
The EPA has 88 violations on file for Fawn Frazer Jt Water Auth, of which 46 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.