Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2020-09-01 |
| TT | Health-based | Resolved | 2020-09-01 |
| TT | Health-based | Resolved | 2020-09-01 |
| TT | Health-based | Resolved | 2020-09-01 |
| TT | Health-based | Resolved | 2020-08-01 |
| TT | Health-based | Resolved | 2020-08-01 |
| TT | Health-based | Resolved | 2020-08-01 |
| TT | Health-based | Resolved | 2020-08-01 |
| TT | Health-based | Resolved | 2020-08-01 |
| Other | Monitoring | Resolved | 2025-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 231 µg/L 18% of the EPA limit 1300 µg/L
worst single sample: 550 µg/L | 90/96 | SYR4 | 2013–2019 |
| Bromodichloromethane | 26.36 µg/L No EPA limit set
worst single sample: 28 µg/L | 64/64 | SYR4 | 2012–2019 |
| Chloroform | 39.855 µg/L No EPA limit set
worst single sample: 49.7 µg/L | 64/64 | SYR4 | 2012–2019 |
| Dibromochloromethane | 24.175 µg/L No EPA limit set
worst single sample: 33 µg/L | 64/64 | SYR4 | 2012–2019 |
| TTHM | 85.84 µg/L 107% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 94 µg/L | 64/64 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 25.925 µg/L 43% of the EPA limit 60 µg/L
worst single sample: 36 µg/L | 62/64 | SYR4 | 2012–2019 |
| Bromoform | 8.51 µg/L No EPA limit set
worst single sample: 14 µg/L | 47/64 | SYR4 | 2012–2019 |
| Lead | 13.4 µg/L 89% of the EPA limit 15 µg/L
worst single sample: 17 µg/L | 25/96 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 13.38 µg/L No EPA limit set
worst single sample: 14.7 µg/L | 12/12 | SYR4 | 2015–2019 |
| Trichloroacetic Acid | 13.34 µg/L No EPA limit set
worst single sample: 15.1 µg/L | 12/12 | SYR4 | 2015–2019 |
| Lead | 0.0075 mg/L 50% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 1996 |
| Dibromoacetic Acid | 2.384 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 3/12 | SYR4 | 2015–2019 |
| Monobromoacetic Acid | 3.05 µg/L No EPA limit set | 1/12 | SYR4 | 2015–2019 |
| Monochloroacetic Acid | 2.11 µg/L No EPA limit set | 1/12 | SYR4 | 2015–2019 |
Utility contact
Frequently asked questions about Aspinwall Boro Water Dept
Is Aspinwall Boro Water Dept tap water safe to drink?
EPA monitoring detected 14 contaminants in Aspinwall Boro Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Aspinwall Boro Water Dept's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Aspinwall Boro Water Dept serve?
Aspinwall Boro Water Dept reports serving 3,151 people in Pennsylvania, per its EPA record.
Has Aspinwall Boro Water Dept had any water quality violations?
The EPA has 53 violations on file for Aspinwall Boro Water Dept, of which 9 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.