Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2004-01-01 → 2004-03-31 |
| TT | Health-based | Resolved | 2004-01-01 → 2004-03-31 |
| MR | Monitoring | Resolved | 2023-04-01 → 2023-06-30 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MON | Monitoring | Resolved | 2021-01-01 → 2021-01-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 544 µg/L 42% of the EPA limit 1300 µg/L | 60/60 | SYR4 | 2013–2019 |
| Chloroform | 69.6 µg/L No EPA limit set | 60/60 | SYR4 | 2012–2019 |
| TTHM | 75.4 µg/L 94% of the EPA limit 80 µg/L | 60/60 | SYR4 | 2012–2019 |
| Bromodichloromethane | 7.4 µg/L No EPA limit set | 59/60 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 65.6 µg/L 109% of the EPA limit, in the worst sample — 60 µg/L | 53/60 | SYR4 | 2012–2019 |
| Nitrate | 550 µg/L 5.5% of the EPA limit 10000 µg/L | 26/40 | SYR4 | 2012–2019 |
| Lead | 35.1 µg/L 234% of the EPA limit, in the worst sample — 15 µg/L | 15/60 | SYR4 | 2013–2019 |
| Lead | 0.0014 mg/L 9.3% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Barium | 1120 µg/L 56% of the EPA limit 2000 µg/L | 11/11 | SYR4 | 2012–2019 |
| Fluoride | 900 µg/L 23% of the EPA limit 4000 µg/L | 11/11 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 28.2 µg/L No EPA limit set | 10/10 | SYR4 | 2018–2019 |
| Trichloroacetic Acid | 42.9 µg/L No EPA limit set | 10/10 | SYR4 | 2018–2019 |
| Dibromochloromethane | 1.4 µg/L No EPA limit set | 8/60 | SYR4 | 2012–2019 |
| Lithium | 13.7 µg/L No EPA limit set | 2/8 | UCMR-5 | 2024 |
97 contaminants tested, none detected
Utility contact
Frequently asked questions about Somerset Boro Muni Water Auth
Is Somerset Boro Muni Water Auth tap water safe to drink?
EPA monitoring detected 14 contaminants in Somerset Boro Muni Water Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Somerset Boro Muni Water Auth's water?
EPA monitoring detected Copper, Chloroform, TTHM, Bromodichloromethane, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Somerset Boro Muni Water Auth serve?
Somerset Boro Muni Water Auth reports serving 6,309 people in Pennsylvania, per its EPA record.
Has Somerset Boro Muni Water Auth had any water quality violations?
The EPA has 495 violations on file for Somerset Boro Muni Water Auth, of which 2 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.