Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Archived | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Archived | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Archived | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Archived | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Archived | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2024-06-01 → 2024-06-30 |
| MON | Monitoring | Resolved | 2022-12-01 → 2022-12-31 |
| MON | Monitoring | Resolved | 2022-12-01 → 2022-12-31 |
| MON | Monitoring | Resolved | 2022-12-01 → 2022-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 966 µg/L 74% of the EPA limit 1300 µg/L | 30/30 | SYR4 | 2013–2019 |
| Lead | 13 µg/L 87% of the EPA limit 15 µg/L | 27/30 | SYR4 | 2013–2019 |
| Nitrate | 3030 µg/L 30% of the EPA limit 10000 µg/L | 20/32 | SYR4 | 2012–2019 |
| Barium | 115 µg/L 5.8% of the EPA limit 2000 µg/L | 7/8 | SYR4 | 2012–2018 |
| Bromodichloromethane | 6.09 µg/L No EPA limit set | 7/9 | SYR4 | 2012–2019 |
| Bromoform | 2.84 µg/L No EPA limit set | 7/9 | SYR4 | 2012–2019 |
| Chloroform | 9.08 µg/L No EPA limit set | 7/9 | SYR4 | 2012–2019 |
| Dibromochloromethane | 6.28 µg/L No EPA limit set | 7/9 | SYR4 | 2012–2019 |
| TTHM | 21.2 µg/L 27% of the EPA limit 80 µg/L | 7/9 | SYR4 | 2012–2019 |
| Lead | 0.0500 mg/L 333% above the EPA limit of 0.0150 mg/L | 5/5 | LCR | 2001 |
| Total Haloacetic Acids (HAA5) | 6.12 µg/L 10% of the EPA limit 60 µg/L | 5/9 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.92 µg/L No EPA limit set | 4/8 | SYR4 | 2014–2019 |
| Arsenic | 0.2430 µg/L 2.4% of the EPA limit 10 µg/L | 2/8 | SYR4 | 2012–2018 |
| Fluoride | 180 µg/L 4.5% of the EPA limit 4000 µg/L | 2/8 | SYR4 | 2012–2018 |
| Benzo(A)Pyrene | 0.1800 µg/L 90% of the EPA limit 0.2000 µg/L | 1/12 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 6.12 µg/L No EPA limit set | 1/8 | SYR4 | 2014–2019 |
| Selenium | 2.09 µg/L 4.2% of the EPA limit 50 µg/L | 1/8 | SYR4 | 2012–2018 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Kreamer Mun Auth
Is Kreamer Mun Auth tap water safe to drink?
EPA monitoring detected 17 contaminants in Kreamer Mun Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Kreamer Mun Auth's water?
EPA monitoring detected Copper, Lead, Nitrate, Barium, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Kreamer Mun Auth serve?
Kreamer Mun Auth reports serving 980 people in Pennsylvania, per its EPA record.
Has Kreamer Mun Auth had any water quality violations?
The EPA has 85 violations on file for Kreamer Mun Auth, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.