Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Total Haloacetic Acids (HAA5) | 103.5 µg/L 173% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 111 µg/L | 47/47 | SYR4 | 2012–2019 |
| Chloroform | 90.3 µg/L No EPA limit set
worst single sample: 113 µg/L | 46/46 | SYR4 | 2012–2019 |
| TTHM | 101.775 µg/L 127% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 123 µg/L | 46/46 | SYR4 | 2012–2019 |
| Bromodichloromethane | 10.46 µg/L No EPA limit set
worst single sample: 11.4 µg/L | 45/46 | SYR4 | 2012–2019 |
| Copper | 253.2 µg/L 19% of the EPA limit 1300 µg/L
worst single sample: 362 µg/L | 40/40 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.185 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 16/46 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 32 µg/L No EPA limit set
worst single sample: 34.3 µg/L | 11/11 | SYR4 | 2015–2019 |
| Trichloroacetic Acid | 73.5 µg/L No EPA limit set
worst single sample: 79 µg/L | 11/11 | SYR4 | 2015–2019 |
| Monochloroacetic Acid | 49.5 µg/L No EPA limit set
worst single sample: 51 µg/L | 7/11 | SYR4 | 2015–2019 |
| Lead | 0.0023 mg/L 15% of the EPA limit 0.0150 mg/L | 3/3 | LCR | 1995 |
| Bromoform | 7 µg/L No EPA limit set | 1/46 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 0.2800 µg/L No EPA limit set | 1/11 | SYR4 | 2015–2019 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about East Taylor Muni Auth
Is East Taylor Muni Auth tap water safe to drink?
EPA monitoring detected 12 contaminants in East Taylor Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in East Taylor Muni Auth's water?
EPA monitoring detected Total Haloacetic Acids (HAA5), Chloroform, TTHM, Bromodichloromethane, Copper, and others. The full list with the level and data source for each is above.
How many people does East Taylor Muni Auth serve?
East Taylor Muni Auth reports serving 3,152 people in Pennsylvania, per its EPA record.
Has East Taylor Muni Auth had any water quality violations?
The EPA has 319 violations on file for East Taylor Muni Auth, of which 185 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.