Tap WaterIndex

← Pennsylvania

Tap water quality report

Highland S & W Auth Lloydell

EPA monitoring tested this supplier for 78 contaminants and detected 14. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

78
contaminants tested
14
detected
723
people served
0
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Ground water
Ownership
Local government
Counties served
Cambria

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
49
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2023-01-01 → 2023-12-31
MR Monitoring Resolved 2023-01-01 → 2023-12-31
MR Monitoring Resolved 2023-01-01 → 2023-12-31
MR Monitoring Resolved 2023-01-01 → 2023-12-31
MR Monitoring Resolved 2023-01-01 → 2023-12-31
MR Monitoring Resolved 2023-01-01 → 2023-12-31
MR Monitoring Resolved 2023-01-01 → 2023-12-31
MR Monitoring Resolved 2023-01-01 → 2023-12-31
MR Monitoring Resolved 2023-01-01 → 2023-12-31
MR Monitoring Resolved 2023-01-01 → 2023-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
324.8 µg/L 25%
of the EPA limit 1300 µg/L
worst single sample: 370 µg/L
40/40 SYR4 2013–2019
Chloroform
1.18 µg/L
No EPA limit set
worst single sample: 1.2 µg/L
5/7 SYR4 2014–2019
TTHM
4.12 µg/L 5.2%
of the EPA limit 80 µg/L
worst single sample: 4.3 µg/L
5/7 SYR4 2014–2019
Bromodichloromethane
1.285 µg/L
No EPA limit set
worst single sample: 1.3 µg/L
4/7 SYR4 2014–2019
Dibromochloromethane
1.1925 µg/L
No EPA limit set
worst single sample: 1.2 µg/L
4/7 SYR4 2014–2019
Barium
735.2 µg/L 37%
of the EPA limit 2000 µg/L
worst single sample: 788 µg/L
3/3 SYR4 2012–2018
Dichloroacetic Acid
2.094 µg/L
No EPA limit set
worst single sample: 2.18 µg/L
2/2 SYR4 2015–2019
Nitrate
1400 µg/L 14%
of the EPA limit 10000 µg/L
 2/18 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
20.059 µg/L 33%
of the EPA limit 60 µg/L
worst single sample: 21 µg/L
2/7 SYR4 2014–2019
Bromoform
0.6000 µg/L
No EPA limit set
 1/7 SYR4 2014–2019
Fluoride
66 µg/L 1.7%
of the EPA limit 4000 µg/L
 1/3 SYR4 2012–2018
Mercury
0.4080 µg/L 20%
of the EPA limit 2 µg/L
 1/3 SYR4 2012–2018
Monobromoacetic Acid
0.3200 µg/L
No EPA limit set
 1/2 SYR4 2015–2019
Monochloroacetic Acid
20 µg/L
No EPA limit set
 1/2 SYR4 2015–2019
64 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,3,7,8-TCDD2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoLeadMethoxychlorNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
JEREMY S. HORVAT
Phone
814-266-3146

Frequently asked questions about Highland S & W Auth Lloydell

Is Highland S & W Auth Lloydell tap water safe to drink?

EPA monitoring detected 14 contaminants in Highland S & W Auth Lloydell's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Highland S & W Auth Lloydell's water?

EPA monitoring detected Copper, Chloroform, TTHM, Bromodichloromethane, Dibromochloromethane, and others. The full list with the level and data source for each is above.

How many people does Highland S & W Auth Lloydell serve?

Highland S & W Auth Lloydell reports serving 723 people in Pennsylvania, per its EPA record.

Has Highland S & W Auth Lloydell had any water quality violations?

The EPA has 49 violations on file for Highland S & W Auth Lloydell, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.