Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-01-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2025-07-01 → 2025-09-30 |
| MR | Monitoring | Resolved | 2025-07-01 → 2025-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1160 µg/L 89% of the EPA limit 1300 µg/L | 42/43 | SYR4 | 2013–2019 |
| Bromodichloromethane | 10 µg/L No EPA limit set | 31/31 | SYR4 | 2012–2019 |
| Chloroform | 20 µg/L No EPA limit set | 31/31 | SYR4 | 2012–2019 |
| TTHM | 30 µg/L 38% of the EPA limit 80 µg/L | 31/31 | SYR4 | 2012–2019 |
| Dibromochloromethane | 10.37 µg/L No EPA limit set | 30/31 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 83.5 µg/L 139% of the EPA limit, in the worst sample — 60 µg/L | 26/33 | SYR4 | 2012–2019 |
| Bromoform | 4.76 µg/L No EPA limit set | 12/31 | SYR4 | 2012–2019 |
| Nitrate | 1790 µg/L 18% of the EPA limit 10000 µg/L | 8/14 | SYR4 | 2012–2019 |
| Barium | 37 µg/L 1.9% of the EPA limit 2000 µg/L | 7/8 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 3.01 µg/L No EPA limit set | 6/6 | SYR4 | 2015–2019 |
| Fluoride | 171 µg/L 4.3% of the EPA limit 4000 µg/L | 5/8 | SYR4 | 2012–2019 |
| Selenium | 7.3 µg/L 15% of the EPA limit 50 µg/L | 5/9 | SYR4 | 2012–2019 |
| Lithium | 18.5 µg/L No EPA limit set | 5/6 | UCMR-5 | 2025 |
| Trichloroacetic Acid | 2.82 µg/L No EPA limit set | 3/6 | SYR4 | 2015–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 2/2 | LCR | 1995 |
| Bromate | 23 µg/L 230% of the EPA limit, in the worst sample — 10 µg/L | 1/1 | SYR4 | 2017 |
| Chromium | 0.9000 µg/L 0.9% of the EPA limit 100 µg/L | 1/8 | SYR4 | 2012–2019 |
| Lead | 2.8 µg/L 19% of the EPA limit 15 µg/L | 1/32 | SYR4 | 2013–2019 |
93 contaminants tested, none detected
Utility contact
Frequently asked questions about Hastings Muni Auth
Is Hastings Muni Auth tap water safe to drink?
EPA monitoring detected 18 contaminants in Hastings Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hastings Muni Auth's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, TTHM, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Hastings Muni Auth serve?
Hastings Muni Auth reports serving 2,100 people in Pennsylvania, per its EPA record.
Has Hastings Muni Auth had any water quality violations?
The EPA has 122 violations on file for Hastings Muni Auth, of which 0 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.