Tap WaterIndex

← Pennsylvania

Tap water quality report

Bel Air Park Apts

EPA monitoring tested this supplier for 79 contaminants and detected 21. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

79
contaminants tested
21
detected
44
people served
3
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Ground water
Ownership
Private
Counties served
Blair

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

3
health-based violations
314
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2013-04-01 → 2013-04-30
TT Health-based Resolved 2013-04-01 → 2013-04-30
TT Health-based Resolved 2013-04-01 → 2013-04-30
MR Monitoring Resolved 2025-01-01 → 2025-12-31
MR Monitoring Resolved 2025-01-01 → 2025-12-31
MR Monitoring Resolved 2025-01-01 → 2025-12-31
MR Monitoring Resolved 2025-01-01 → 2025-12-31
MR Monitoring Resolved 2025-01-01 → 2025-12-31
MR Monitoring Resolved 2025-01-01 → 2025-12-31
MR Monitoring Resolved 2025-01-01 → 2025-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
238 µg/L 18%
of the EPA limit 1300 µg/L
 15/15 SYR4 2013–2019
Bromodichloromethane
3.7 µg/L
No EPA limit set
 11/16 SYR4 2013–2019
TTHM
100 µg/L 125%
of the EPA limit, in the worst sample — 80 µg/L
 11/16 SYR4 2013–2019
Chloroform
96.3 µg/L
No EPA limit set
 9/16 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
21.5 µg/L 36%
of the EPA limit 60 µg/L
 9/16 SYR4 2013–2019
Dichloroacetic Acid
9.35 µg/L
No EPA limit set
 7/14 SYR4 2013–2019
Dibromochloromethane
0.7000 µg/L
No EPA limit set
 6/16 SYR4 2013–2019
Trichloroacetic Acid
2.6 µg/L
No EPA limit set
 6/14 SYR4 2013–2019
Nitrate
724 µg/L 7.2%
of the EPA limit 10000 µg/L
 4/14 SYR4 2012–2019
Lead
1.22 µg/L 8.1%
of the EPA limit 15 µg/L
 3/15 SYR4 2013–2019
Barium
62.5 µg/L 3.1%
of the EPA limit 2000 µg/L
 2/3 SYR4 2012–2018
2,4-D
0.4600 µg/L 0.7%
of the EPA limit 70 µg/L
 1/11 SYR4 2013–2019
Dalapon
0.4900 µg/L 0.2%
of the EPA limit 200 µg/L
 1/8 SYR4 2013–2019
Dinoseb
0.7000 µg/L 10%
of the EPA limit 7 µg/L
 1/11 SYR4 2013–2019
Ethylbenzene
1.15 µg/L 0.2%
of the EPA limit 700 µg/L
 1/10 SYR4 2013–2019
Lead
0.0047 mg/L 31%
of the EPA limit 0.0150 mg/L
 1/1 LCR 1996
Monochloroacetic Acid
2.14 µg/L
No EPA limit set
 1/14 SYR4 2013–2019
Pentachlorophenol
0.0760 µg/L 7.6%
of the EPA limit 1 µg/L
 1/11 SYR4 2013–2019
Picloram
1.65 µg/L 0.3%
of the EPA limit 500 µg/L
 1/12 SYR4 2013–2019
Toluene
12.3 µg/L 1.2%
of the EPA limit 1000 µg/L
 1/10 SYR4 2013–2019
Xylenes, Total
9.24 µg/L 0.1%
of the EPA limit 10000 µg/L
 1/10 SYR4 2013–2019
58 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,3,7,8-TCDD2,4,5-TPAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDiquatEthylene DibromideEndothallEndrinFluorideGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNitriteOxamylSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
EUGENE MALONE
Phone
814-626-0688

Frequently asked questions about Bel Air Park Apts

Is Bel Air Park Apts tap water safe to drink?

EPA monitoring detected 21 contaminants in Bel Air Park Apts's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Bel Air Park Apts's water?

EPA monitoring detected Copper, Bromodichloromethane, TTHM, Chloroform, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Bel Air Park Apts serve?

Bel Air Park Apts reports serving 44 people in Pennsylvania, per its EPA record.

Has Bel Air Park Apts had any water quality violations?

The EPA has 314 violations on file for Bel Air Park Apts, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.