Tap WaterIndex

← Pennsylvania

Tap water quality report

Tyrone Boro Water Auth

EPA monitoring tested this supplier for 109 contaminants and detected 13. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

109
contaminants tested
13
detected
6,500
people served
3
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Surface water
Ownership
Local government
Counties served
Blair

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

3
health-based violations
97
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 1995-06-01 → 1995-06-30
TT Health-based Resolved 1995-06-01 → 1995-06-30
TT Health-based Resolved 1995-06-01 → 1995-06-30
MR Monitoring Resolved 2018-04-01 → 2018-04-30
MR Monitoring Resolved 2018-04-01 → 2018-04-30
MON Monitoring Resolved 2017-12-01 → 2017-12-31
MON Monitoring Resolved 2017-12-01 → 2017-12-31
MON Monitoring Resolved 2017-12-01 → 2017-12-31
MR Monitoring Resolved 2017-12-01 → 2017-12-31
MR Monitoring Resolved 2017-12-01 → 2017-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
82 µg/L 6.3%
of the EPA limit 1300 µg/L
 55/60 SYR4 2013–2019
Bromodichloromethane
8.31 µg/L
No EPA limit set
 50/50 SYR4 2012–2019
Chloroform
64.1 µg/L
No EPA limit set
 50/50 SYR4 2012–2019
TTHM
71.8 µg/L 90%
of the EPA limit 80 µg/L
 50/50 SYR4 2012–2019
Dichloroacetic Acid
25.2 µg/L
No EPA limit set
 48/49 SYR4 2014–2019
Trichloroacetic Acid
23.1 µg/L
No EPA limit set
 48/49 SYR4 2014–2019
Total Haloacetic Acids (HAA5)
34.5 µg/L 57%
of the EPA limit 60 µg/L
 46/49 SYR4 2012–2019
Dibromochloromethane
1.51 µg/L
No EPA limit set
 37/50 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 14/14 LCR 2025
Barium
33.9 µg/L 1.7%
of the EPA limit 2000 µg/L
 8/8 SYR4 2012–2019
Fluoride
811 µg/L 20%
of the EPA limit 4000 µg/L
 5/8 SYR4 2012–2019
Lead
11.2 µg/L 75%
of the EPA limit 15 µg/L
 2/60 SYR4 2013–2019
Arsenic
0.2560 µg/L 2.6%
of the EPA limit 10 µg/L
 1/8 SYR4 2012–2019
96 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitrateNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
ARDEAN LATCHFORD
Phone
814-329-8031

Frequently asked questions about Tyrone Boro Water Auth

Is Tyrone Boro Water Auth tap water safe to drink?

EPA monitoring detected 13 contaminants in Tyrone Boro Water Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Tyrone Boro Water Auth's water?

EPA monitoring detected Copper, Bromodichloromethane, Chloroform, TTHM, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.

How many people does Tyrone Boro Water Auth serve?

Tyrone Boro Water Auth reports serving 6,500 people in Pennsylvania, per its EPA record.

Has Tyrone Boro Water Auth had any water quality violations?

The EPA has 97 violations on file for Tyrone Boro Water Auth, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.