Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2022-04-01 → 2022-04-30 |
| TT | Health-based | Resolved | 2022-04-01 → 2022-04-30 |
| TT | Health-based | Resolved | 2022-04-01 → 2022-04-30 |
| MCL | Health-based | Resolved | 2007-12-01 → 2007-12-31 |
| MCL | Health-based | Resolved | 2007-12-01 → 2007-12-31 |
| MCL | Health-based | Resolved | 2007-12-01 → 2007-12-31 |
| MCL | Health-based | Resolved | 2007-12-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2025-01-01 → 2025-01-31 |
| MR | Monitoring | Resolved | 2025-01-01 → 2025-01-31 |
| Other | Monitoring | Resolved | 2022-04-13 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 5431 µg/L 54% of the EPA limit 10000 µg/L
worst single sample: 5700 µg/L | 64/64 | SYR4 | 2012–2019 |
| Copper | 138.2 µg/L 11% of the EPA limit 1300 µg/L
worst single sample: 148 µg/L | 15/15 | SYR4 | 2013–2019 |
| Lead | 8.2 µg/L 55% of the EPA limit 15 µg/L
worst single sample: 9 µg/L | 9/15 | SYR4 | 2013–2019 |
| Bromodichloromethane | 6.535 µg/L No EPA limit set
worst single sample: 7 µg/L | 4/4 | SYR4 | 2013–2018 |
| Chloroform | 15.76 µg/L No EPA limit set
worst single sample: 17.2 µg/L | 4/4 | SYR4 | 2013–2018 |
| Dibromochloromethane | 2.38 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 4/4 | SYR4 | 2013–2018 |
| TTHM | 24.675 µg/L 31% of the EPA limit 80 µg/L
worst single sample: 26.7 µg/L | 4/4 | SYR4 | 2013–2018 |
| Total Haloacetic Acids (HAA5) | 9.825 µg/L 16% of the EPA limit 60 µg/L
worst single sample: 10.5 µg/L | 4/4 | SYR4 | 2013–2018 |
| Lead | 0.0040 mg/L 27% of the EPA limit 0.0150 mg/L | 2/2 | LCR | 1994 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 1/1 | SYR4 | 2018 |
| Dichloroacetic Acid | 8 µg/L No EPA limit set | 1/1 | SYR4 | 2018 |
| Trichloroacetic Acid | 2 µg/L No EPA limit set | 1/1 | SYR4 | 2018 |
67 contaminants tested, none detected
Utility contact
Frequently asked questions about Lehigh Twp Muni Auth
Is Lehigh Twp Muni Auth tap water safe to drink?
EPA monitoring detected 12 contaminants in Lehigh Twp Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lehigh Twp Muni Auth's water?
EPA monitoring detected Nitrate, Copper, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Lehigh Twp Muni Auth serve?
Lehigh Twp Muni Auth reports serving 260 people in Pennsylvania, per its EPA record.
Has Lehigh Twp Muni Auth had any water quality violations?
The EPA has 136 violations on file for Lehigh Twp Muni Auth, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.