← Pennsylvania

Tap water quality report

Hamburg Muni Water&Sewer Auth

EPA monitoring tested this supplier for 109 contaminants and detected 11. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

109
contaminants tested
11
detected
4,990
people served
14
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Berks

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

14
health-based violations
303
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2019-02-01 → 2019-02-28
TT Health-based Resolved 2019-02-01 → 2019-02-28
TT Health-based Resolved 2019-02-01 → 2019-02-28
TT Health-based Resolved 2019-02-01 → 2019-02-28
TT Health-based Resolved 2014-10-01 → 2014-10-31
TT Health-based Resolved 2014-10-01 → 2014-10-31
TT Health-based Resolved 2014-05-01 → 2014-05-31
TT Health-based Resolved 2014-05-01 → 2014-05-31
TT Health-based Resolved 2014-05-01 → 2014-05-31
TT Health-based Resolved 2014-05-01 → 2014-05-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
477.8 µg/L 37%
of the EPA limit 1300 µg/L
worst single sample: 632 µg/L
60/60 SYR4 2013–2019
Chloroform
44.77 µg/L
No EPA limit set
worst single sample: 64.4 µg/L
48/51 SYR4 2012–2019
TTHM
56.7 µg/L 71%
of the EPA limit 80 µg/L
worst single sample: 71.3 µg/L
41/44 SYR4 2012–2019
Bromodichloromethane
6.11 µg/L
No EPA limit set
worst single sample: 7.4 µg/L
39/51 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
30.4 µg/L 51%
of the EPA limit 60 µg/L
worst single sample: 34 µg/L
33/45 SYR4 2012–2019
Lead
0.0020 mg/L 13%
of the EPA limit 0.0150 mg/L
16/16 LCR 2025
Dibromochloromethane
1.37 µg/L
No EPA limit set
worst single sample: 2 µg/L
15/46 SYR4 2012–2019
Dichloroacetic Acid
12.55 µg/L
No EPA limit set
worst single sample: 13 µg/L
10/14 SYR4 2017–2019
Lead
761.2 µg/L 5075%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 1260 µg/L
9/60 SYR4 2013–2019
Trichloroacetic Acid
20.8 µg/L
No EPA limit set
worst single sample: 22 µg/L
9/14 SYR4 2017–2019
2,3,7,8-TCDD
0.0000010 µg/L 3.3%
of the EPA limit 0.000030 µg/L
1/9 SYR4 2012–2017
98 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneFluorideGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitrateNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
STANLEY HENNE
Phone
610-562-7821

Frequently asked questions about Hamburg Muni Water&Sewer Auth

Is Hamburg Muni Water&Sewer Auth tap water safe to drink?

EPA monitoring detected 11 contaminants in Hamburg Muni Water&Sewer Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Hamburg Muni Water&Sewer Auth's water?

EPA monitoring detected Copper, Chloroform, TTHM, Bromodichloromethane, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Hamburg Muni Water&Sewer Auth serve?

Hamburg Muni Water&Sewer Auth reports serving 4,990 people in Pennsylvania, per its EPA record.

Has Hamburg Muni Water&Sewer Auth had any water quality violations?

The EPA has 303 violations on file for Hamburg Muni Water&Sewer Auth, of which 14 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.