Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2026-03-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-03-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-03-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-03-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-03-01 → 2026-03-31 |
| MR | Monitoring | Resolved | 2026-03-01 → 2026-03-31 |
| MON | Monitoring | Resolved | 2023-12-01 → 2023-12-31 |
| MON | Monitoring | Resolved | 2023-12-01 → 2023-12-31 |
| MON | Monitoring | Resolved | 2023-12-01 → 2023-12-31 |
| MON | Monitoring | Resolved | 2023-12-01 → 2023-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 340 µg/L 26% of the EPA limit 1300 µg/L | 20/25 | SYR4 | 2013–2019 |
| Nitrate | 2960 µg/L 30% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 4.8 µg/L 8% of the EPA limit 60 µg/L | 5/6 | SYR4 | 2013–2019 |
| Bromoform | 5.1 µg/L No EPA limit set | 4/6 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.81 µg/L No EPA limit set | 4/4 | SYR4 | 2018–2019 |
| Dibromochloromethane | 4.9 µg/L No EPA limit set | 4/6 | SYR4 | 2013–2019 |
| Lead | 0.0070 mg/L 47% of the EPA limit 0.0150 mg/L | 4/4 | LCR | 1996 |
| Lead | 4.1 µg/L 27% of the EPA limit 15 µg/L | 4/25 | SYR4 | 2013–2019 |
| TTHM | 14.3 µg/L 18% of the EPA limit 80 µg/L | 4/6 | SYR4 | 2013–2019 |
| Arsenic | 5.3 µg/L 53% of the EPA limit 10 µg/L | 3/3 | SYR4 | 2012–2018 |
| Barium | 210 µg/L 11% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Bromodichloromethane | 2.4 µg/L No EPA limit set | 2/6 | SYR4 | 2013–2019 |
| Combined Uranium | 2.3989 µg/L 8% of the EPA limit 30 µg/L | 2/2 | SYR4 | 2013–2019 |
| Chloroform | 1.9 µg/L No EPA limit set | 1/6 | SYR4 | 2013–2019 |
| Chromium | 2.8 µg/L 2.8% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2012–2018 |
| Fluoride | 210 µg/L 5.3% of the EPA limit 4000 µg/L | 1/3 | SYR4 | 2012–2018 |
| Selenium | 1.1 µg/L 2.2% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2018 |
| Trichloroacetic Acid | 1.17 µg/L No EPA limit set | 1/4 | SYR4 | 2018–2019 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Eaton Sewer & Water Co
Is Eaton Sewer & Water Co tap water safe to drink?
EPA monitoring detected 18 contaminants in Eaton Sewer & Water Co's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Eaton Sewer & Water Co's water?
EPA monitoring detected Copper, Nitrate, Total Haloacetic Acids (HAA5), Bromoform, Dibromoacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Eaton Sewer & Water Co serve?
Eaton Sewer & Water Co reports serving 3,100 people in Pennsylvania, per its EPA record.
Has Eaton Sewer & Water Co had any water quality violations?
The EPA has 537 violations on file for Eaton Sewer & Water Co, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.