Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MR | Monitoring | Resolved | 2021-01-01 → 2021-03-31 |
| MR | Monitoring | Resolved | 2021-01-01 → 2021-03-31 |
| MR | Monitoring | Resolved | 2021-01-01 → 2021-03-31 |
| MR | Monitoring | Resolved | 2021-01-01 → 2021-03-31 |
| MR | Monitoring | Resolved | 2021-01-01 → 2021-03-31 |
| MR | Monitoring | Resolved | 2021-01-01 → 2021-03-31 |
| Other | Monitoring | Resolved | 2019-10-11 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 10500 µg/L 105% of the EPA limit, in the worst sample — 10000 µg/L | 82/82 | SYR4 | 2012–2019 |
| Copper | 789 µg/L 61% of the EPA limit 1300 µg/L | 36/40 | SYR4 | 2013–2019 |
| Bromodichloromethane | 13 µg/L No EPA limit set | 25/26 | SYR4 | 2016–2019 |
| Dibromochloromethane | 6.6 µg/L No EPA limit set | 25/26 | SYR4 | 2016–2019 |
| TTHM | 45 µg/L 56% of the EPA limit 80 µg/L | 25/26 | SYR4 | 2016–2019 |
| Chloroform | 24.1 µg/L No EPA limit set | 21/26 | SYR4 | 2016–2019 |
| Lead | 15 µg/L 100% of the EPA limit 15 µg/L | 14/30 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 6.94 µg/L 12% of the EPA limit 60 µg/L | 14/26 | SYR4 | 2016–2019 |
| Bromoform | 1.4 µg/L No EPA limit set | 6/26 | SYR4 | 2016–2019 |
| Dichloroacetic Acid | 2.62 µg/L No EPA limit set | 4/12 | SYR4 | 2018–2019 |
| Lead | 0.0070 mg/L 47% of the EPA limit 0.0150 mg/L | 4/4 | LCR | 1996 |
| Barium | 90 µg/L 4.5% of the EPA limit 2000 µg/L | 3/4 | SYR4 | 2012–2018 |
| Trichloroacetic Acid | 1.34 µg/L No EPA limit set | 3/12 | SYR4 | 2018–2019 |
| Benzo(A)Pyrene | 0.1500 µg/L 75% of the EPA limit 0.2000 µg/L | 1/16 | SYR4 | 2014–2019 |
| Di(2-ethylhexyl) Phthalate | 2.33 µg/L 39% of the EPA limit 6 µg/L | 1/12 | SYR4 | 2014–2019 |
| Endothall | 18.5 µg/L 19% of the EPA limit 100 µg/L | 1/14 | SYR4 | 2014–2019 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about Borough of Atglen
Is Borough of Atglen tap water safe to drink?
EPA monitoring detected 16 contaminants in Borough of Atglen's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Borough of Atglen's water?
EPA monitoring detected Nitrate, Copper, Bromodichloromethane, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Borough of Atglen serve?
Borough of Atglen reports serving 1,406 people in Pennsylvania, per its EPA record.
Has Borough of Atglen had any water quality violations?
The EPA has 152 violations on file for Borough of Atglen, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.