Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 2025-07-01 → 2025-09-30 |
| MR | Monitoring | Archived | 2025-07-01 → 2025-09-30 |
| MR | Monitoring | Resolved | 2021-02-01 → 2021-02-28 |
| MR | Monitoring | Resolved | 2021-02-01 → 2021-02-28 |
| MR | Monitoring | Resolved | 2014-01-01 → 2014-03-31 |
| MR | Monitoring | Resolved | 2014-01-01 → 2014-03-31 |
| MR | Monitoring | Resolved | 2014-01-01 → 2014-03-31 |
| MR | Monitoring | Resolved | 2014-01-01 → 2014-03-31 |
| MR | Monitoring | Resolved | 2014-01-01 → 2014-03-31 |
| MR | Monitoring | Resolved | 2014-01-01 → 2014-03-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 2260 µg/L 23% of the EPA limit 10000 µg/L | 84/96 | SYR4 | 2012–2019 |
| Copper | 1850 µg/L 142% of the EPA limit, in the worst sample — 1300 µg/L | 62/68 | SYR4 | 2012–2019 |
| Arsenic | 12.3 µg/L 123% of the EPA limit, in the worst sample — 10 µg/L | 31/37 | SYR4 | 2012–2019 |
| Lead | 19 µg/L 127% of the EPA limit, in the worst sample — 15 µg/L | 30/60 | SYR4 | 2013–2019 |
| Bromodichloromethane | 16.3 µg/L No EPA limit set | 19/28 | SYR4 | 2012–2019 |
| Chloroform | 26.1 µg/L No EPA limit set | 19/28 | SYR4 | 2012–2019 |
| Dibromochloromethane | 8.38 µg/L No EPA limit set | 18/28 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| TTHM | 52.2 µg/L 65% of the EPA limit 80 µg/L | 12/21 | SYR4 | 2012–2019 |
| Barium | 121 µg/L 6.1% of the EPA limit 2000 µg/L | 11/11 | SYR4 | 2012–2018 |
| Bromoform | 2 µg/L No EPA limit set | 10/26 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 19.1 µg/L 32% of the EPA limit 60 µg/L | 9/21 | SYR4 | 2012–2019 |
| Chromium | 3.9 µg/L 3.9% of the EPA limit 100 µg/L | 8/11 | SYR4 | 2012–2018 |
| Selenium | 3.3 µg/L 6.6% of the EPA limit 50 µg/L | 6/11 | SYR4 | 2012–2018 |
| Lithium | 27.3 µg/L No EPA limit set | 6/6 | UCMR-5 | 2025 |
| Combined Uranium | 7.07154 µg/L 24% of the EPA limit 30 µg/L | 3/4 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 1.75 µg/L No EPA limit set | 2/2 | SYR4 | 2018–2019 |
| Dichloroacetic Acid | 10.1 µg/L No EPA limit set | 2/2 | SYR4 | 2018–2019 |
| Trichloroacetic Acid | 3.14 µg/L No EPA limit set | 2/2 | SYR4 | 2018–2019 |
| Antimony, Total | 0.0500 µg/L 0.8% of the EPA limit 6 µg/L | 1/11 | SYR4 | 2012–2018 |
88 contaminants tested, none detected
Utility contact
Frequently asked questions about Milford Twp Water Authority
Is Milford Twp Water Authority tap water safe to drink?
EPA monitoring detected 22 contaminants in Milford Twp Water Authority's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Milford Twp Water Authority's water?
EPA monitoring detected Nitrate, Copper, Arsenic, Lead, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Milford Twp Water Authority serve?
Milford Twp Water Authority reports serving 4,497 people in Pennsylvania, per its EPA record.
Has Milford Twp Water Authority had any water quality violations?
The EPA has 162 violations on file for Milford Twp Water Authority, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.