Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2020-07-20 |
| TT | Health-based | Resolved | 2020-07-20 |
| TT | Health-based | Resolved | 2020-07-20 |
| TT | Health-based | Resolved | 2020-07-20 |
| TT | Health-based | Resolved | 2020-07-20 |
| TT | Health-based | Resolved | 2017-02-01 → 2017-02-28 |
| TT | Health-based | Resolved | 2017-02-01 → 2017-02-28 |
| TT | Health-based | Resolved | 2017-02-01 → 2017-02-28 |
| TT | Health-based | Resolved | 2017-02-01 → 2017-02-28 |
| MON | Monitoring | Resolved | 2025-09-01 → 2025-09-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 3830 µg/L 38% of the EPA limit 10000 µg/L | 196/240 | SYR4 | 2012–2019 |
| TTHM | 121.4 µg/L 152% of the EPA limit, in the worst sample — 80 µg/L | 128/128 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 85.8 µg/L 143% of the EPA limit, in the worst sample — 60 µg/L | 128/128 | SYR4 | 2012–2019 |
| Chloroform | 66.8 µg/L No EPA limit set | 117/117 | SYR4 | 2012–2019 |
| Copper | 982 µg/L 76% of the EPA limit 1300 µg/L | 91/91 | SYR4 | 2013–2019 |
| Dibromochloromethane | 7.3 µg/L No EPA limit set | 72/72 | SYR4 | 2012–2019 |
| Bromodichloromethane | 17 µg/L No EPA limit set | 70/70 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 11.2 µg/L No EPA limit set | 48/48 | SYR4 | 2017–2019 |
| Dichloroacetic Acid | 17 µg/L No EPA limit set | 47/48 | SYR4 | 2017–2019 |
| Barium | 536 µg/L 27% of the EPA limit 2000 µg/L | 45/45 | SYR4 | 2012–2018 |
| Lead | 80.8 µg/L 539% of the EPA limit, in the worst sample — 15 µg/L | 43/91 | SYR4 | 2013–2019 |
| Chromium | 3.9 µg/L 3.9% of the EPA limit 100 µg/L | 24/45 | SYR4 | 2012–2018 |
| Arsenic | 4.2 µg/L 42% of the EPA limit 10 µg/L | 21/45 | SYR4 | 2012–2018 |
| Bromoform | 1.4 µg/L No EPA limit set | 18/49 | SYR4 | 2017–2019 |
| Fluoride | 606 µg/L 15% of the EPA limit 4000 µg/L | 17/57 | SYR4 | 2012–2018 |
| Selenium | 5.4 µg/L 11% of the EPA limit 50 µg/L | 16/45 | SYR4 | 2012–2018 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Combined Uranium | 8.76418 µg/L 29% of the EPA limit 30 µg/L | 12/18 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 1.4 µg/L No EPA limit set | 12/48 | SYR4 | 2017–2019 |
| Mercury | 0.0550 µg/L 2.8% of the EPA limit 2 µg/L | 7/45 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 4.6 µg/L No EPA limit set | 7/46 | SYR4 | 2017–2019 |
| Lithium | 19.2 µg/L No EPA limit set | 6/34 | UCMR-5 | 2025 |
| Tetrachloroethylene | 1.63 µg/L 33% of the EPA limit 5 µg/L | 4/117 | SYR4 | 2012–2019 |
| Antimony, Total | 0.1000 µg/L 1.7% of the EPA limit 6 µg/L | 2/45 | SYR4 | 2012–2018 |
| Cadmium | 0.0400 µg/L 0.8% of the EPA limit 5 µg/L | 1/45 | SYR4 | 2012–2018 |
77 contaminants tested, none detected
Utility contact
Frequently asked questions about Northampton Bucks Co Mun Auth
Is Northampton Bucks Co Mun Auth tap water safe to drink?
EPA monitoring detected 34 contaminants in Northampton Bucks Co Mun Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Northampton Bucks Co Mun Auth's water?
EPA monitoring detected Nitrate, TTHM, Total Haloacetic Acids (HAA5), Chloroform, Copper, and others. The full list with the level and data source for each is above.
How many people does Northampton Bucks Co Mun Auth serve?
Northampton Bucks Co Mun Auth reports serving 36,750 people in Pennsylvania, per its EPA record.
Has Northampton Bucks Co Mun Auth had any water quality violations?
The EPA has 2057 violations on file for Northampton Bucks Co Mun Auth, of which 9 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.