Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| MCL | Health-based | Resolved | 2009-01-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-01-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-01-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-01-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-01-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2006-07-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-07-01 → 2006-09-30 |
| MCL | Health-based | Resolved | 2006-07-01 → 2006-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate-Nitrite | 9560 µg/L 96% of the EPA limit 10000 µg/L | 100/100 | SYR4 | 2012–2019 |
| Copper | 2510 µg/L 193% of the EPA limit, in the worst sample — 1300 µg/L | 66/70 | SYR4 | 2012–2017 |
| Chloroform | 3.09 µg/L No EPA limit set | 40/67 | SYR4 | 2012–2019 |
| Tetrachloroethylene | 11.4 µg/L 228% of the EPA limit, in the worst sample — 5 µg/L | 30/59 | SYR4 | 2012–2019 |
| Lead | 322 µg/L 2147% of the EPA limit, in the worst sample — 15 µg/L | 24/70 | SYR4 | 2012–2017 |
| Bromodichloromethane | 1.91 µg/L No EPA limit set | 18/67 | SYR4 | 2012–2019 |
| Lead | 0.0107 mg/L 71% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Barium | 515 µg/L 26% of the EPA limit 2000 µg/L | 14/14 | SYR4 | 2012–2017 |
| Fluoride | 200 µg/L 5% of the EPA limit 4000 µg/L | 14/14 | SYR4 | 2012–2017 |
| Gross Beta Particle Activity | 17.4 pCi/L No EPA limit set | 14/14 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.46 pCi/L 29% of the EPA limit 5 pCi/L | 13/14 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 7.71 pCi/L 51% of the EPA limit 15 pCi/L | 12/14 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.74 µg/L No EPA limit set | 9/67 | SYR4 | 2012–2019 |
| Bromoform | 1.46 µg/L No EPA limit set | 8/67 | SYR4 | 2012–2019 |
| TTHM | 3.47 µg/L 4.3% of the EPA limit 80 µg/L | 3/8 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.07 µg/L No EPA limit set | 2/8 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 2.38 µg/L 4% of the EPA limit 60 µg/L | 2/8 | SYR4 | 2012–2019 |
| 1,2-Dichloroethane | 0.6100 µg/L 12% of the EPA limit 5 µg/L | 1/59 | SYR4 | 2012–2019 |
| Thallium, Total | 1 µg/L 50% of the EPA limit 2 µg/L | 1/14 | SYR4 | 2012–2017 |
| Trichloroacetic Acid | 1.31 µg/L No EPA limit set | 1/8 | SYR4 | 2012–2019 |
30 contaminants tested, none detected
Utility contact
Frequently asked questions about Highpoint Mhp
Is Highpoint Mhp tap water safe to drink?
EPA monitoring detected 20 contaminants in Highpoint Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Highpoint Mhp's water?
EPA monitoring detected Nitrate-Nitrite, Copper, Chloroform, Tetrachloroethylene, Lead, and others. The full list with the level and data source for each is above.
How many people does Highpoint Mhp serve?
Highpoint Mhp reports serving 600 people in Oklahoma, per its EPA record.
Has Highpoint Mhp had any water quality violations?
The EPA has 394 violations on file for Highpoint Mhp, of which 53 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.