← Oklahoma

Tap water quality report

Ketchum Pwa

EPA monitoring tested this supplier for 100 contaminants and detected 15. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

100
contaminants tested
15
detected
4,025
people served
13
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Craig

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

13
health-based violations
34
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2005-04-01 → 2005-06-30
TT Health-based Resolved 2005-04-01 → 2005-06-30
TT Health-based Resolved 2005-04-01 → 2005-06-30
TT Health-based Resolved 2005-04-01 → 2005-06-30
TT Health-based Resolved 2005-01-01 → 2005-03-31
TT Health-based Resolved 2005-01-01 → 2005-03-31
TT Health-based Resolved 2005-01-01 → 2005-03-31
TT Health-based Resolved 2005-01-01 → 2005-03-31
TT Health-based Resolved 2004-10-01 → 2004-12-31
TT Health-based Resolved 2004-10-01 → 2004-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
12.9 µg/L
No EPA limit set
81/81 SYR4 2012–2019
Chloroform
94.9 µg/L
No EPA limit set
81/81 SYR4 2012–2019
Dichloroacetic Acid
29.9 µg/L
No EPA limit set
78/78 SYR4 2012–2019
TTHM
108 µg/L 135%
of the EPA limit, in the worst sample — 80 µg/L
78/78 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
64.2 µg/L 107%
of the EPA limit, in the worst sample — 60 µg/L
78/78 SYR4 2012–2019
Trichloroacetic Acid
34.3 µg/L
No EPA limit set
78/78 SYR4 2012–2019
Dibromochloromethane
2.77 µg/L
No EPA limit set
77/81 SYR4 2012–2019
Copper
385 µg/L 30%
of the EPA limit 1300 µg/L
30/30 SYR4 2012–2018
Monochloroacetic Acid
10.9 µg/L
No EPA limit set
24/78 SYR4 2012–2019
Lead
0.0015 mg/L 10%
of the EPA limit 0.0150 mg/L
15/15 LCR 2024
Nitrate-Nitrite
1570 µg/L 16%
of the EPA limit 10000 µg/L
14/16 SYR4 2012–2019
Lead
2.122 µg/L 14%
of the EPA limit 15 µg/L
4/30 SYR4 2012–2018
Monobromoacetic Acid
1.56 µg/L
No EPA limit set
2/78 SYR4 2012–2019
Atrazine
0.7470 µg/L 25%
of the EPA limit 3 µg/L
1/3 SYR4 2019
Barium
56.1 µg/L 2.8%
of the EPA limit 2000 µg/L
1/1 SYR4 2013
85 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCadmiumCarbon TetrachlorideChromiumCombined Radium (-226 And -228)Combined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebEndrinEthylbenzeneFluorideGlyphosateGross Alpha, Excl. Radon And UGross Beta Particle ActivityHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
KETCHUM PWA
Phone
918-782-2123
Email
ketchumpwa@gmail.com

Frequently asked questions about Ketchum Pwa

Is Ketchum Pwa tap water safe to drink?

EPA monitoring detected 15 contaminants in Ketchum Pwa's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Ketchum Pwa's water?

EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Ketchum Pwa serve?

Ketchum Pwa reports serving 4,025 people in Oklahoma, per its EPA record.

Has Ketchum Pwa had any water quality violations?

The EPA has 34 violations on file for Ketchum Pwa, of which 13 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.