Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2003-02-01 → 2003-02-28 |
| MCL | Health-based | Resolved | 2003-02-01 → 2003-02-28 |
| MCL | Health-based | Resolved | 2003-02-01 → 2003-02-28 |
| MCL | Health-based | Resolved | 2003-02-01 → 2003-02-28 |
| MCL | Health-based | Resolved | 1994-06-01 → 1994-06-30 |
| MCL | Health-based | Resolved | 1994-06-01 → 1994-06-30 |
| MCL | Health-based | Resolved | 1994-06-01 → 1994-06-30 |
| MCL | Health-based | Resolved | 1994-06-01 → 1994-06-30 |
| MCL | Health-based | Resolved | 1994-06-01 → 1994-06-30 |
| MCL | Health-based | Resolved | 1994-06-01 → 1994-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Bromodichloromethane | 3.348 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 5/10 | SYR4 | 2013–2019 |
| Copper | 484 µg/L 37% of the EPA limit 1300 µg/L
worst single sample: 560 µg/L | 5/15 | SYR4 | 2014–2018 |
| Chloroform | 16.376 µg/L No EPA limit set
worst single sample: 19.92 µg/L | 5/10 | SYR4 | 2013–2019 |
| Dibromochloromethane | 4.65 µg/L No EPA limit set
worst single sample: 4.9 µg/L | 5/10 | SYR4 | 2013–2019 |
| Lead | 7.2 µg/L 48% of the EPA limit 15 µg/L
worst single sample: 8 µg/L | 5/15 | SYR4 | 2014–2018 |
| TTHM | 22.296 µg/L 28% of the EPA limit 80 µg/L
worst single sample: 24.06 µg/L | 4/8 | SYR4 | 2013–2019 |
| Bromoform | 1.737 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 3/10 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 3.7293 µg/L No EPA limit set
worst single sample: 3.9 µg/L | 3/8 | SYR4 | 2013–2019 |
| Barium | 172.475 µg/L 8.6% of the EPA limit 2000 µg/L
worst single sample: 180 µg/L | 2/3 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 7.391 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
| Fluoride | 250 µg/L 6.3% of the EPA limit 4000 µg/L | 1/3 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 10.746 µg/L 18% of the EPA limit 60 µg/L | 1/8 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 3.355 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
38 contaminants tested, none detected
Utility contact
Frequently asked questions about Belle Acres Mobile Home Park
Is Belle Acres Mobile Home Park tap water safe to drink?
EPA monitoring detected 14 contaminants in Belle Acres Mobile Home Park's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Belle Acres Mobile Home Park's water?
EPA monitoring detected Lead, Bromodichloromethane, Copper, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Belle Acres Mobile Home Park serve?
Belle Acres Mobile Home Park reports serving 25 people in Ohio, per its EPA record.
Has Belle Acres Mobile Home Park had any water quality violations?
The EPA has 102 violations on file for Belle Acres Mobile Home Park, of which 12 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.