Tap WaterIndex

← Ohio

Tap water quality report

Pike Water, Inc.-Plant

EPA monitoring tested this supplier for 83 contaminants and detected 19. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

83
contaminants tested
19
detected
15,487
people served
3
health-based violations
Ohio rankingsLead in OhioPFAS in Ohio
Water source
Ground water
Ownership
Private
Counties served
Pike

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

3
health-based violations
56
violations on file
5
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 2014-05-01 → 2014-05-31
MCL Health-based Archived 2014-05-01 → 2014-05-31
MCL Health-based Archived 2014-05-01 → 2014-05-31
Other Monitoring Unaddressed 2025-11-19
Other Monitoring Unaddressed 2025-02-14
Other Monitoring Unaddressed 2024-09-12
MR Monitoring Resolved 2023-01-01 → 2023-12-31
MR Monitoring Resolved 2023-01-01 → 2023-12-31
MR Monitoring Resolved 2023-01-01 → 2023-12-31
Other Monitoring Resolved 2021-07-01

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
Pfpea 0.0031 µg/L 2/2 2024

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
31.7 µg/L
No EPA limit set
 118/118 SYR4 2012–2019
Chloroform
44.8 µg/L
No EPA limit set
 118/118 SYR4 2012–2019
Dibromochloromethane
22.6 µg/L
No EPA limit set
 118/118 SYR4 2012–2019
TTHM
91.1 µg/L 114%
of the EPA limit, in the worst sample — 80 µg/L
 118/118 SYR4 2012–2019
Dichloroacetic Acid
12.7 µg/L
No EPA limit set
 116/116 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
25.6 µg/L 43%
of the EPA limit 60 µg/L
 116/116 SYR4 2012–2019
Trichloroacetic Acid
11.5 µg/L
No EPA limit set
 114/116 SYR4 2012–2019
Bromoform
3.5 µg/L
No EPA limit set
 109/118 SYR4 2012–2019
Dibromoacetic Acid
5 µg/L
No EPA limit set
 102/116 SYR4 2012–2019
Copper
1030 µg/L 79%
of the EPA limit 1300 µg/L
 26/61 SYR4 2014–2017
Nitrate
230 µg/L 2.3%
of the EPA limit 10000 µg/L
 24/32 SYR4 2012–2019
Lead
0.00060 mg/L 4%
of the EPA limit 0.0150 mg/L
 19/19 LCR 2025
Nitrate-Nitrite
230 µg/L 2.3%
of the EPA limit 10000 µg/L
 12/16 SYR4 2012–2019
Barium
161 µg/L 8.1%
of the EPA limit 2000 µg/L
 6/6 SYR4 2013–2019
Fluoride
1000 µg/L 25%
of the EPA limit 4000 µg/L
 6/6 SYR4 2013–2019
Lead
10 µg/L 67%
of the EPA limit 15 µg/L
 3/61 SYR4 2014–2017
Monobromoacetic Acid
1.4 µg/L
No EPA limit set
 3/116 SYR4 2012–2019
Combined Radium (-226 And -228)
2.1 pCi/L 42%
of the EPA limit 5 pCi/L
 1/1 SYR4 2019
64 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBenzeneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbon TetrachlorideChromiumDichloromethaneEthylbenzeneHfpo-DaLassoMercuryMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitritePfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpesPftaPftrdaPfunaSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
CAUDILL, BERLIN
Phone
740-947-2524
Email
pikewater@yahoo.com

Frequently asked questions about Pike Water, Inc.-Plant

Is Pike Water, Inc.-Plant tap water safe to drink?

EPA monitoring detected 19 contaminants in Pike Water, Inc.-Plant's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Pike Water, Inc.-Plant's water?

EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.

How many people does Pike Water, Inc.-Plant serve?

Pike Water, Inc.-Plant reports serving 15,487 people in Ohio, per its EPA record.

Has Pike Water, Inc.-Plant had any water quality violations?

The EPA has 56 violations on file for Pike Water, Inc.-Plant, of which 3 are health-based (a contaminant limit or required treatment was breached) and 5 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.