Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2005-03-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-03-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-03-01 → 2005-03-31 |
| MCL | Health-based | Resolved | 2005-03-01 → 2005-03-31 |
| Other | Monitoring | Resolved | 2022-08-17 |
| Other | Monitoring | Resolved | 2022-08-17 |
| MR | Monitoring | Resolved | 2012-12-31 |
| MR | Monitoring | Resolved | 2012-12-31 |
| MR | Monitoring | Resolved | 2002-07-01 → 2002-12-31 |
| MR | Monitoring | Resolved | 2002-07-01 → 2002-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 934 µg/L 72% of the EPA limit 1300 µg/L | 122/122 | SYR4 | 2012–2019 |
| Lead | 15.1 µg/L 101% of the EPA limit, in the worst sample — 15 µg/L | 86/121 | SYR4 | 2012–2019 |
| Bromodichloromethane | 16.72 µg/L No EPA limit set | 43/44 | SYR4 | 2012–2019 |
| Dibromochloromethane | 12.39 µg/L No EPA limit set | 43/44 | SYR4 | 2012–2019 |
| Bromoform | 2.79 µg/L No EPA limit set | 41/44 | SYR4 | 2012–2019 |
| Chloroform | 55 µg/L No EPA limit set | 41/44 | SYR4 | 2012–2019 |
| TTHM | 72.9 µg/L 91% of the EPA limit 80 µg/L | 41/41 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 17.27 µg/L 29% of the EPA limit 60 µg/L | 41/41 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.927 µg/L No EPA limit set | 38/41 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 11.11 µg/L No EPA limit set | 37/41 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 4.214 µg/L No EPA limit set | 35/41 | SYR4 | 2012–2019 |
| Lead | 0.0023 mg/L 15% of the EPA limit 0.0150 mg/L | 24/24 | LCR | 2025 |
| Fluoride | 1150 µg/L 29% of the EPA limit 4000 µg/L | 7/7 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 3.639 µg/L No EPA limit set | 4/41 | SYR4 | 2012–2019 |
| Nitrate | 124 µg/L 1.2% of the EPA limit 10000 µg/L | 4/16 | SYR4 | 2012–2019 |
| Barium | 161 µg/L 8.1% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2012–2018 |
67 contaminants tested, none detected
Utility contact
Frequently asked questions about Englewood City
Is Englewood City tap water safe to drink?
EPA monitoring detected 16 contaminants in Englewood City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Englewood City's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Dibromochloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Englewood City serve?
Englewood City reports serving 13,463 people in Ohio, per its EPA record.
Has Englewood City had any water quality violations?
The EPA has 11 violations on file for Englewood City, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.