Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Unaddressed | 2025-11-20 |
| RPT | Monitoring | Resolved | 2025-07-02 |
| RPT | Monitoring | Resolved | 2025-07-02 |
| RPT | Monitoring | Resolved | 2025-07-02 |
| Other | Monitoring | Resolved | 2020-08-16 |
| Other | Monitoring | Resolved | 2020-08-16 |
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 246 µg/L 19% of the EPA limit 1300 µg/L | 19/60 | SYR4 | 2012–2018 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2024 |
| Bromodichloromethane | 18.6 µg/L No EPA limit set | 15/15 | SYR4 | 2012–2019 |
| Bromoform | 12.5 µg/L No EPA limit set | 15/15 | SYR4 | 2012–2019 |
| Chloroform | 11.8 µg/L No EPA limit set | 15/15 | SYR4 | 2012–2019 |
| Dibromochloromethane | 22.9 µg/L No EPA limit set | 15/15 | SYR4 | 2012–2019 |
| TTHM | 64.3 µg/L 80% of the EPA limit 80 µg/L | 15/15 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 5.5 µg/L No EPA limit set | 12/15 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.4 µg/L No EPA limit set | 12/15 | SYR4 | 2012–2019 |
| Nitrate | 240 µg/L 2.4% of the EPA limit 10000 µg/L | 6/16 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 11 µg/L 18% of the EPA limit 60 µg/L | 4/15 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.1 µg/L No EPA limit set | 4/15 | SYR4 | 2012–2019 |
| Fluoride | 530 µg/L 13% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 240 µg/L 2.4% of the EPA limit 10000 µg/L | 3/8 | SYR4 | 2012–2019 |
| Lithium | 18 µg/L No EPA limit set | 2/2 | UCMR-5 | 2024 |
| Lead | 13 µg/L 87% of the EPA limit 15 µg/L | 1/60 | SYR4 | 2012–2018 |
67 contaminants tested, none detected
Utility contact
Frequently asked questions about Johnstown City
Is Johnstown City tap water safe to drink?
EPA monitoring detected 16 contaminants in Johnstown City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Johnstown City's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Bromoform, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Johnstown City serve?
Johnstown City reports serving 5,200 people in Ohio, per its EPA record.
Has Johnstown City had any water quality violations?
The EPA has 106 violations on file for Johnstown City, of which 0 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.