← Ohio

Tap water quality report

Harrison City

EPA monitoring tested this supplier for 82 contaminants and detected 18. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

82
contaminants tested
18
detected
11,600
people served
4
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Hamilton

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

4
health-based violations
70
violations on file
3
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 1994-09-01 → 1994-09-30
MCL Health-based Resolved 1994-09-01 → 1994-09-30
MCL Health-based Resolved 1994-09-01 → 1994-09-30
MCL Health-based Resolved 1994-09-01 → 1994-09-30
Other Monitoring Unaddressed 2024-12-20
Other Monitoring Unaddressed 2020-02-06
Other Monitoring Unaddressed 2018-09-14
MR Monitoring Resolved 2000-01-01 → 2000-12-31
MR Monitoring Resolved 2000-01-01 → 2000-12-31
MR Monitoring Resolved 2000-01-01 → 2000-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
2320 µg/L 178%
of the EPA limit, in the worst sample — 1300 µg/L
101/105 SYR4 2012–2019
Bromodichloromethane
11.9 µg/L
No EPA limit set
38/39 SYR4 2012–2019
Chloroform
17.4 µg/L
No EPA limit set
38/39 SYR4 2012–2019
Dibromochloromethane
11.2 µg/L
No EPA limit set
38/39 SYR4 2012–2019
TTHM
35.8 µg/L 45%
of the EPA limit 80 µg/L
38/39 SYR4 2012–2019
Bromoform
4.06 µg/L
No EPA limit set
37/39 SYR4 2012–2019
Dibromoacetic Acid
6.7 µg/L
No EPA limit set
33/39 SYR4 2012–2019
Trichloroacetic Acid
4.2 µg/L
No EPA limit set
30/39 SYR4 2012–2019
Dichloroacetic Acid
4.5 µg/L
No EPA limit set
29/39 SYR4 2012–2019
Lead
0.00070 mg/L 4.7%
of the EPA limit 0.0150 mg/L
26/26 LCR 2025
Total Haloacetic Acids (HAA5)
9.7 µg/L 16%
of the EPA limit 60 µg/L
21/39 SYR4 2012–2019
Nitrate
1950 µg/L 20%
of the EPA limit 10000 µg/L
16/16 SYR4 2012–2019
Lead
30.8 µg/L 205%
of the EPA limit, in the worst sample — 15 µg/L
8/104 SYR4 2012–2019
Nitrate-Nitrite
1950 µg/L 20%
of the EPA limit 10000 µg/L
8/8 SYR4 2012–2019
Monobromoacetic Acid
2.8 µg/L
No EPA limit set
4/39 SYR4 2012–2019
Barium
70 µg/L 3.5%
of the EPA limit 2000 µg/L
3/3 SYR4 2012–2018
Fluoride
980 µg/L 25%
of the EPA limit 4000 µg/L
3/3 SYR4 2012–2018
Mercury
0.5000 µg/L 25%
of the EPA limit 2 µg/L
1/3 SYR4 2012–2018
64 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBenzeneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbon TetrachlorideChromiumDichloromethaneEthylbenzeneHfpo-DaLassoMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitritePfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
KNUEVEN, TERRY
Email
tknueven@harrisonohio.gov

Frequently asked questions about Harrison City

Is Harrison City tap water safe to drink?

EPA monitoring detected 18 contaminants in Harrison City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Harrison City's water?

EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.

How many people does Harrison City serve?

Harrison City reports serving 11,600 people in Ohio, per its EPA record.

Has Harrison City had any water quality violations?

The EPA has 70 violations on file for Harrison City, of which 4 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.