Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
| MCL | Health-based | Resolved | 2015-01-01 → 2015-03-31 |
| MCL | Health-based | Resolved | 2015-01-01 → 2015-03-31 |
| MCL | Health-based | Resolved | 2015-01-01 → 2015-03-31 |
| MCL | Health-based | Resolved | 2014-10-01 → 2014-12-31 |
| MCL | Health-based | Resolved | 2014-10-01 → 2014-12-31 |
| MCL | Health-based | Resolved | 2014-10-01 → 2014-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 4350 µg/L 44% of the EPA limit 10000 µg/L | 176/194 | SYR4 | 2012–2019 |
| Bromoform | 65.1 µg/L No EPA limit set | 74/76 | SYR4 | 2012–2019 |
| Dibromochloromethane | 64.9 µg/L No EPA limit set | 74/76 | SYR4 | 2012–2019 |
| Bromodichloromethane | 43.8 µg/L No EPA limit set | 70/76 | SYR4 | 2012–2019 |
| TTHM | 164 µg/L 205% of the EPA limit, in the worst sample — 80 µg/L | 67/68 | SYR4 | 2012–2019 |
| Chloroform | 123 µg/L No EPA limit set | 64/75 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 38.4 µg/L 64% of the EPA limit 60 µg/L | 57/68 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 18.3 µg/L No EPA limit set | 51/68 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 27.2 µg/L No EPA limit set | 48/68 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 4350 µg/L 44% of the EPA limit 10000 µg/L | 40/43 | SYR4 | 2016–2019 |
| Copper | 55 µg/L 4.2% of the EPA limit 1300 µg/L | 38/40 | SYR4 | 2014–2017 |
| Trichloroacetic Acid | 7.1 µg/L No EPA limit set | 35/68 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 22/22 | LCR | 2026 |
| Monochloroacetic Acid | 6.9 µg/L No EPA limit set | 14/68 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.8 µg/L No EPA limit set | 10/68 | SYR4 | 2012–2019 |
| Fluoride | 2800 µg/L 70% of the EPA limit 4000 µg/L | 9/9 | SYR4 | 2012–2019 |
| Barium | 68 µg/L 3.4% of the EPA limit 2000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Dichloromethane | 0.7000 µg/L 14% of the EPA limit 5 µg/L | 1/8 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 6.4 pCi/L No EPA limit set | 1/1 | SYR4 | 2014 |
| Lithium | 9.2 µg/L No EPA limit set | 1/4 | UCMR-5 | 2025 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about Swanton Village
Is Swanton Village tap water safe to drink?
EPA monitoring detected 20 contaminants in Swanton Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Swanton Village's water?
EPA monitoring detected Nitrate, Bromoform, Dibromochloromethane, Bromodichloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Swanton Village serve?
Swanton Village reports serving 3,855 people in Ohio, per its EPA record.
Has Swanton Village had any water quality violations?
The EPA has 87 violations on file for Swanton Village, of which 83 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.