Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 28.35 µg/L No EPA limit set
worst single sample: 36.4 µg/L | 60/60 | SYR4 | 2012–2019 |
| Chloroform | 97.04 µg/L No EPA limit set
worst single sample: 117.6 µg/L | 60/60 | SYR4 | 2012–2019 |
| Dibromochloromethane | 11.825 µg/L No EPA limit set
worst single sample: 14.9 µg/L | 60/60 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 31.005 µg/L No EPA limit set
worst single sample: 37.4 µg/L | 60/60 | SYR4 | 2012–2019 |
| TTHM | 137.255 µg/L 172% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 168.8 µg/L | 60/60 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 50.835 µg/L 85% of the EPA limit 60 µg/L
worst single sample: 62.1 µg/L | 60/60 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 13.935 µg/L No EPA limit set
worst single sample: 17.1 µg/L | 60/60 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 5.215 µg/L No EPA limit set
worst single sample: 5.8 µg/L | 58/60 | SYR4 | 2012–2019 |
| Copper | 79.4 µg/L 6.1% of the EPA limit 1300 µg/L
worst single sample: 90 µg/L | 53/80 | SYR4 | 2014–2019 |
| Bromoform | 1.445 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 52/60 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 5.76 µg/L No EPA limit set
worst single sample: 6.8 µg/L | 35/60 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2023 |
| Lead | 40.8 µg/L 272% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 54 µg/L | 7/80 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 1.2 µg/L No EPA limit set | 5/60 | SYR4 | 2012–2019 |
| Lithium | 11 µg/L No EPA limit set | 1/3 | UCMR-5 | 2025 |
25 contaminants tested, none detected
Utility contact
Frequently asked questions about Bluffton Village
Is Bluffton Village tap water safe to drink?
EPA monitoring detected 19 contaminants in Bluffton Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bluffton Village's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Bluffton Village serve?
Bluffton Village reports serving 4,125 people in Ohio, per its EPA record.
Has Bluffton Village had any water quality violations?
The EPA has 193 violations on file for Bluffton Village, of which 87 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.