Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2018-07-01 → 2018-07-31 |
| MON | Monitoring | Resolved | 2018-07-01 → 2018-07-31 |
| MON | Monitoring | Resolved | 2018-07-01 → 2018-07-31 |
| MON | Monitoring | Resolved | 2018-07-01 → 2018-07-31 |
| MR | Monitoring | Resolved | 2005-07-01 → 2005-07-31 |
| MR | Monitoring | Resolved | 2005-07-01 → 2005-07-31 |
| MR | Monitoring | Resolved | 2005-07-01 → 2005-07-31 |
| MR | Monitoring | Resolved | 2005-01-01 → 2005-03-31 |
| MR | Monitoring | Resolved | 2005-01-01 → 2005-03-31 |
| MR | Monitoring | Resolved | 2005-01-01 → 2005-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1380 µg/L 106% of the EPA limit, in the worst sample — 1300 µg/L | 119/122 | SYR4 | 2014–2019 |
| Bromodichloromethane | 12.7 µg/L No EPA limit set | 41/41 | SYR4 | 2012–2019 |
| Bromoform | 3.11 µg/L No EPA limit set | 41/41 | SYR4 | 2012–2019 |
| Chloroform | 16.1 µg/L No EPA limit set | 41/41 | SYR4 | 2012–2019 |
| Dibromochloromethane | 10.49 µg/L No EPA limit set | 41/41 | SYR4 | 2012–2019 |
| Lead | 47.6 µg/L 317% of the EPA limit, in the worst sample — 15 µg/L | 41/122 | SYR4 | 2014–2019 |
| TTHM | 39.52 µg/L 49% of the EPA limit 80 µg/L | 39/39 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 11.29 µg/L 19% of the EPA limit 60 µg/L | 37/39 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.288 µg/L No EPA limit set | 35/39 | SYR4 | 2012–2019 |
| Lead | 0.0018 mg/L 12% of the EPA limit 0.0150 mg/L | 24/24 | LCR | 2025 |
| Dichloroacetic Acid | 5.4 µg/L No EPA limit set | 23/39 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 2.686 µg/L No EPA limit set | 15/39 | SYR4 | 2012–2019 |
| Nitrate | 294 µg/L 2.9% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Barium | 25.3 µg/L 1.3% of the EPA limit 2000 µg/L | 2/2 | SYR4 | 2014–2017 |
| Fluoride | 970 µg/L 24% of the EPA limit 4000 µg/L | 2/2 | SYR4 | 2014–2017 |
| Nitrate-Nitrite | 215 µg/L 2.2% of the EPA limit 10000 µg/L | 2/3 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.059 µg/L No EPA limit set | 1/39 | SYR4 | 2012–2019 |
65 contaminants tested, none detected
Utility contact
Frequently asked questions about Adams County Regional Wd
Is Adams County Regional Wd tap water safe to drink?
EPA monitoring detected 17 contaminants in Adams County Regional Wd's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Adams County Regional Wd's water?
EPA monitoring detected Copper, Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Adams County Regional Wd serve?
Adams County Regional Wd reports serving 21,810 people in Ohio, per its EPA record.
Has Adams County Regional Wd had any water quality violations?
The EPA has 15 violations on file for Adams County Regional Wd, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.