Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2021-01-01 |
| TT | Health-based | Resolved | 2021-01-01 |
| TT | Health-based | Resolved | 2021-01-01 |
| TT | Health-based | Resolved | 2021-01-01 |
| MON | Monitoring | Resolved | 2018-12-01 → 2018-12-31 |
| MON | Monitoring | Resolved | 2018-12-01 → 2018-12-31 |
| MON | Monitoring | Resolved | 2018-12-01 → 2018-12-31 |
| MON | Monitoring | Resolved | 2018-12-01 → 2018-12-31 |
| MON | Monitoring | Resolved | 2018-04-01 → 2018-04-30 |
| MON | Monitoring | Resolved | 2018-04-01 → 2018-04-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0140 mg/L 93% of the EPA limit 0.0150 mg/L | 45/45 | LCR | 2025 |
| Nitrate | 3820 µg/L 38% of the EPA limit 10000 µg/L
worst single sample: 3920 µg/L | 26/26 | SYR4 | 2012–2019 |
| Dibromochloromethane | 6 µg/L No EPA limit set
worst single sample: 9.8 µg/L | 11/12 | SYR4 | 2013–2019 |
| TTHM | 15.35 µg/L 19% of the EPA limit 80 µg/L
worst single sample: 24.7 µg/L | 11/12 | SYR4 | 2013–2019 |
| Bromodichloromethane | 3.865 µg/L No EPA limit set
worst single sample: 5.8 µg/L | 10/12 | SYR4 | 2013–2019 |
| Chloroform | 2.4 µg/L No EPA limit set | 10/12 | SYR4 | 2013–2019 |
| Bromoform | 5.23 µg/L No EPA limit set
worst single sample: 6.7 µg/L | 7/12 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.555 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 4/12 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 1.555 µg/L 2.6% of the EPA limit 60 µg/L
worst single sample: 1.6 µg/L | 4/12 | SYR4 | 2013–2019 |
| Gross Alpha, Excl. Radon And U | 7.946 pCi/L 53% of the EPA limit 15 pCi/L
worst single sample: 7.98 pCi/L | 2/3 | SYR4 | 2015–2018 |
| Barium | 18 µg/L 0.9% of the EPA limit 2000 µg/L | 1/4 | SYR4 | 2014–2018 |
| Combined Uranium | 7.3 µg/L 24% of the EPA limit 30 µg/L | 1/3 | SYR4 | 2015–2018 |
| Nitrate-Nitrite | 1970 µg/L 20% of the EPA limit 10000 µg/L | 1/13 | SYR4 | 2012–2019 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Forest Park Water Co Plant #3
Is Forest Park Water Co Plant #3 tap water safe to drink?
EPA monitoring detected 13 contaminants in Forest Park Water Co Plant #3's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Forest Park Water Co Plant #3's water?
EPA monitoring detected Lead, Nitrate, Dibromochloromethane, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Forest Park Water Co Plant #3 serve?
Forest Park Water Co Plant #3 reports serving 67 people in New York, per its EPA record.
Has Forest Park Water Co Plant #3 had any water quality violations?
The EPA has 163 violations on file for Forest Park Water Co Plant #3, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.