Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| RPT | Monitoring | Resolved | 2024-10-17 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| MON | Monitoring | Resolved | 2018-05-01 → 2018-05-31 |
| MON | Monitoring | Resolved | 2018-05-01 → 2018-05-31 |
| MON | Monitoring | Resolved | 2018-05-01 → 2018-05-31 |
| MON | Monitoring | Resolved | 2016-11-01 → 2016-11-30 |
| MON | Monitoring | Resolved | 2016-11-01 → 2016-11-30 |
| MON | Monitoring | Resolved | 2016-11-01 → 2016-11-30 |
| MR | Monitoring | Resolved | 2015-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 149 µg/L 1.5% of the EPA limit 10000 µg/L | 12/14 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2024 |
| Barium | 168.05 µg/L 8.4% of the EPA limit 2000 µg/L
worst single sample: 170 µg/L | 4/4 | SYR4 | 2012–2019 |
| Bromoform | 1.634 µg/L No EPA limit set
worst single sample: 1.64 µg/L | 4/4 | SYR4 | 2013–2018 |
| Dibromoacetic Acid | 2.3515 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 4/4 | SYR4 | 2013–2018 |
| Dibromochloromethane | 2.2585 µg/L No EPA limit set
worst single sample: 2.29 µg/L | 4/4 | SYR4 | 2013–2018 |
| TTHM | 6.331 µg/L 7.9% of the EPA limit 80 µg/L
worst single sample: 6.34 µg/L | 4/4 | SYR4 | 2013–2018 |
| Total Haloacetic Acids (HAA5) | 3.66 µg/L 6.1% of the EPA limit 60 µg/L
worst single sample: 3.9 µg/L | 4/4 | SYR4 | 2013–2018 |
| Bromodichloromethane | 1.515 µg/L No EPA limit set
worst single sample: 1.52 µg/L | 3/4 | SYR4 | 2013–2018 |
| Chloroform | 1.13 µg/L No EPA limit set
worst single sample: 1.15 µg/L | 3/4 | SYR4 | 2013–2018 |
| Dichloroacetic Acid | 1.39 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 2/4 | SYR4 | 2013–2018 |
| Styrene | 9 µg/L 9% of the EPA limit 100 µg/L | 1/5 | SYR4 | 2012–2019 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about Hudson Valley Water Co #2
Is Hudson Valley Water Co #2 tap water safe to drink?
EPA monitoring detected 12 contaminants in Hudson Valley Water Co #2's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hudson Valley Water Co #2's water?
EPA monitoring detected Nitrate, Lead, Barium, Bromoform, Dibromoacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Hudson Valley Water Co #2 serve?
Hudson Valley Water Co #2 reports serving 225 people in New York, per its EPA record.
Has Hudson Valley Water Co #2 had any water quality violations?
The EPA has 71 violations on file for Hudson Valley Water Co #2, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.