Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MRDL | Health-based | Resolved | 2013-07-01 → 2013-09-30 |
| MRDL | Health-based | Resolved | 2013-07-01 → 2013-09-30 |
| MRDL | Health-based | Resolved | 2013-07-01 → 2013-09-30 |
| MR | Monitoring | Resolved | 2015-10-01 |
| MR | Monitoring | Resolved | 2015-10-01 |
| MR | Monitoring | Resolved | 2015-10-01 |
| MR | Monitoring | Resolved | 2015-01-01 → 2015-12-31 |
| MR | Monitoring | Resolved | 2015-01-01 → 2015-12-31 |
| MR | Monitoring | Resolved | 2015-01-01 → 2015-12-31 |
| MR | Monitoring | Resolved | 2015-01-01 → 2015-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2025 |
| Barium | 206.5 µg/L 10% of the EPA limit 2000 µg/L
worst single sample: 210 µg/L | 3/3 | SYR4 | 2013–2019 |
| Bromodichloromethane | 2.029 µg/L No EPA limit set
worst single sample: 2.14 µg/L | 3/3 | SYR4 | 2014–2019 |
| Bromoform | 5.364 µg/L No EPA limit set
worst single sample: 5.74 µg/L | 3/3 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 5.84 µg/L No EPA limit set
worst single sample: 6.3 µg/L | 3/3 | SYR4 | 2014–2019 |
| Dibromochloromethane | 3.1 µg/L No EPA limit set
worst single sample: 3.16 µg/L | 3/3 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 2.27 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 3/3 | SYR4 | 2014–2019 |
| Fluoride | 590 µg/L 15% of the EPA limit 4000 µg/L
worst single sample: 600 µg/L | 3/3 | SYR4 | 2013–2019 |
| TTHM | 10.128 µg/L 13% of the EPA limit 80 µg/L
worst single sample: 10.16 µg/L | 3/3 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 12.98 µg/L 22% of the EPA limit 60 µg/L
worst single sample: 13 µg/L | 3/3 | SYR4 | 2014–2019 |
| Chloroform | 2.4735 µg/L No EPA limit set
worst single sample: 2.56 µg/L | 2/3 | SYR4 | 2014–2019 |
| Arsenic | 1.7 µg/L 17% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2013–2019 |
| Dichloromethane | 0.9000 µg/L 18% of the EPA limit 5 µg/L | 1/6 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 6.3 µg/L No EPA limit set | 1/3 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 4.2 µg/L No EPA limit set | 1/3 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 3.4 µg/L No EPA limit set | 1/3 | SYR4 | 2014–2019 |
56 contaminants tested, none detected
Utility contact
Frequently asked questions about Rivers Edge Mhp
Is Rivers Edge Mhp tap water safe to drink?
EPA monitoring detected 16 contaminants in Rivers Edge Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Rivers Edge Mhp's water?
EPA monitoring detected Lead, Barium, Bromodichloromethane, Bromoform, Dibromoacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Rivers Edge Mhp serve?
Rivers Edge Mhp reports serving 117 people in New York, per its EPA record.
Has Rivers Edge Mhp had any water quality violations?
The EPA has 280 violations on file for Rivers Edge Mhp, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.