Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2015-07-01 |
| Other | Monitoring | Resolved | 2015-07-01 |
| MR | Monitoring | Resolved | 2005-01-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2005-01-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2005-01-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2005-01-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2005-01-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2005-01-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2005-01-01 → 2007-12-31 |
| MR | Monitoring | Resolved | 2005-01-01 → 2007-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 580 µg/L 5.8% of the EPA limit 10000 µg/L | 32/32 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| Bromodichloromethane | 3.175 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 6/6 | SYR4 | 2014–2019 |
| Chloroform | 8.9 µg/L No EPA limit set
worst single sample: 9.1 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dibromochloromethane | 1.55 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 3.725 µg/L No EPA limit set
worst single sample: 3.8 µg/L | 6/6 | SYR4 | 2014–2019 |
| TTHM | 13.45 µg/L 17% of the EPA limit 80 µg/L
worst single sample: 14 µg/L | 6/6 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 2.925 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 6/6 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 7.1 µg/L 12% of the EPA limit 60 µg/L
worst single sample: 7.5 µg/L | 5/5 | SYR4 | 2014–2019 |
| Barium | 213.4 µg/L 11% of the EPA limit 2000 µg/L
worst single sample: 226 µg/L | 4/4 | SYR4 | 2013–2015 |
| Dibromoacetic Acid | 1.2 µg/L No EPA limit set | 1/6 | SYR4 | 2014–2019 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Stevensville+Rfl
Is Stevensville+Rfl tap water safe to drink?
EPA monitoring detected 11 contaminants in Stevensville+Rfl's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Stevensville+Rfl's water?
EPA monitoring detected Nitrate, Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Stevensville+Rfl serve?
Stevensville+Rfl reports serving 3,250 people in New York, per its EPA record.
Has Stevensville+Rfl had any water quality violations?
The EPA has 41 violations on file for Stevensville+Rfl, of which 0 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.