Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2009-05-01 → 2009-05-31 |
| MR | Monitoring | Resolved | 2009-05-01 → 2009-05-31 |
| MR | Monitoring | Resolved | 2009-05-01 → 2009-05-31 |
| MR | Monitoring | Resolved | 2003-01-01 → 2003-12-31 |
| MR | Monitoring | Resolved | 2003-01-01 → 2003-12-31 |
| MR | Monitoring | Resolved | 2003-01-01 → 2003-12-31 |
| MR | Monitoring | Resolved | 2003-01-01 → 2003-12-31 |
| MR | Monitoring | Resolved | 2003-01-01 → 2003-12-31 |
| MR | Monitoring | Resolved | 2003-01-01 → 2003-12-31 |
| MR | Monitoring | Resolved | 2003-01-01 → 2003-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 2200 µg/L 22% of the EPA limit 10000 µg/L | 10/12 | SYR4 | 2012–2019 |
| Lead | 0.0039 mg/L 26% of the EPA limit 0.0150 mg/L | 5/5 | LCR | 2021 |
| Chloroform | 2.395 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 4/4 | SYR4 | 2014–2019 |
| TTHM | 3.755 µg/L 4.7% of the EPA limit 80 µg/L
worst single sample: 4.1 µg/L | 4/4 | SYR4 | 2014–2019 |
| Barium | 33.9 µg/L 1.7% of the EPA limit 2000 µg/L
worst single sample: 34 µg/L | 2/2 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 12.175 µg/L 20% of the EPA limit 60 µg/L
worst single sample: 12.5 µg/L | 2/4 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 8.79 µg/L No EPA limit set
worst single sample: 9.2 µg/L | 2/4 | SYR4 | 2014–2019 |
| Bromodichloromethane | 1.6 µg/L No EPA limit set | 1/4 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 3.3 µg/L No EPA limit set | 1/4 | SYR4 | 2014–2019 |
| Fluoride | 110 µg/L 2.8% of the EPA limit 4000 µg/L | 1/2 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 1 µg/L No EPA limit set | 1/4 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 4 µg/L No EPA limit set | 1/4 | SYR4 | 2014–2019 |
56 contaminants tested, none detected
Utility contact
Frequently asked questions about Misty Hills Water
Is Misty Hills Water tap water safe to drink?
EPA monitoring detected 12 contaminants in Misty Hills Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Misty Hills Water's water?
EPA monitoring detected Nitrate, Lead, Chloroform, TTHM, Barium, and others. The full list with the level and data source for each is above.
How many people does Misty Hills Water serve?
Misty Hills Water reports serving 315 people in New York, per its EPA record.
Has Misty Hills Water had any water quality violations?
The EPA has 70 violations on file for Misty Hills Water, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.