Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2022-03-01 → 2022-03-31 |
| MON | Monitoring | Resolved | 2022-03-01 → 2022-03-31 |
| MON | Monitoring | Resolved | 2022-03-01 → 2022-03-31 |
| MON | Monitoring | Resolved | 2022-03-01 → 2022-03-31 |
| MON | Monitoring | Resolved | 2022-03-01 → 2022-03-31 |
| MON | Monitoring | Resolved | 2022-03-01 → 2022-03-31 |
| MR | Monitoring | Resolved | 2017-01-01 |
| MR | Monitoring | Resolved | 2017-01-01 |
| MR | Monitoring | Resolved | 2016-08-01 → 2016-08-31 |
| MR | Monitoring | Resolved | 2016-08-01 → 2016-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0011 mg/L 7.3% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2023 |
| Bromodichloromethane | 2.5 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 6/6 | SYR4 | 2015–2019 |
| Chloroform | 3.925 µg/L No EPA limit set
worst single sample: 4.1 µg/L | 6/6 | SYR4 | 2015–2019 |
| Dibromochloromethane | 1.4 µg/L No EPA limit set | 6/6 | SYR4 | 2015–2019 |
| TTHM | 7.475 µg/L 9.3% of the EPA limit 80 µg/L
worst single sample: 7.5 µg/L | 6/6 | SYR4 | 2015–2019 |
| Dichloroacetic Acid | 1.96 µg/L No EPA limit set
worst single sample: 2 µg/L | 5/6 | SYR4 | 2015–2019 |
| Total Haloacetic Acids (HAA5) | 2.72 µg/L 4.5% of the EPA limit 60 µg/L
worst single sample: 2.9 µg/L | 5/6 | SYR4 | 2015–2019 |
| Copper | 22.7 µg/L 1.7% of the EPA limit 1300 µg/L | 1/1 | SYR4 | 2018 |
| Dibromoacetic Acid | 1.1 µg/L No EPA limit set | 1/6 | SYR4 | 2015–2019 |
5 contaminants tested, none detected
Utility contact
Frequently asked questions about Sandy Creek Town Wd #1 & #3
Is Sandy Creek Town Wd #1 & #3 tap water safe to drink?
EPA monitoring detected 9 contaminants in Sandy Creek Town Wd #1 & #3's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Sandy Creek Town Wd #1 & #3's water?
EPA monitoring detected Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Sandy Creek Town Wd #1 & #3 serve?
Sandy Creek Town Wd #1 & #3 reports serving 1,464 people in New York, per its EPA record.
Has Sandy Creek Town Wd #1 & #3 had any water quality violations?
The EPA has 15 violations on file for Sandy Creek Town Wd #1 & #3, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.