Tap WaterIndex

← New York

Tap water quality report

Wilson Town Water District

EPA monitoring tested this supplier for 42 contaminants and detected 11. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

42
contaminants tested
11
detected
5,993
people served
0
health-based violations
New York rankingsLead in New YorkPFAS in New York
Water source
SWP
Ownership
Local government
Counties served
Niagara

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
1
violations on file
0
still open
ViolationTypeStatusPeriod
RPT Monitoring Resolved 2024-10-17

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
17.38 µg/L
No EPA limit set
 51/51 SYR4 2013–2019
Chloroform
48.17 µg/L
No EPA limit set
 51/51 SYR4 2013–2019
Dibromochloromethane
7.64 µg/L
No EPA limit set
 51/51 SYR4 2013–2019
Dichloroacetic Acid
24.64 µg/L
No EPA limit set
 51/51 SYR4 2013–2019
TTHM
74.24 µg/L 93%
of the EPA limit 80 µg/L
 51/51 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
39.93 µg/L 67%
of the EPA limit 60 µg/L
 51/51 SYR4 2013–2019
Trichloroacetic Acid
22.43 µg/L
No EPA limit set
 51/51 SYR4 2013–2019
Dibromoacetic Acid
2.89 µg/L
No EPA limit set
 26/51 SYR4 2013–2019
Bromoform
2.23 µg/L
No EPA limit set
 20/51 SYR4 2013–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 15/15 LCR 2025
Monochloroacetic Acid
5.89 µg/L
No EPA limit set
 14/51 SYR4 2013–2019
31 contaminants tested, none detected
11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaHfpo-DaMonobromoacetic AcidNetfosaaNfdhaNmefosaaPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaLithium

Utility contact

Contact
PRINGLE, JAMES T
Phone
716-751-6213
Email
wilson.ny.water@gmail.com

Frequently asked questions about Wilson Town Water District

Is Wilson Town Water District tap water safe to drink?

EPA monitoring detected 11 contaminants in Wilson Town Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Wilson Town Water District's water?

EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.

How many people does Wilson Town Water District serve?

Wilson Town Water District reports serving 5,993 people in New York, per its EPA record.

Has Wilson Town Water District had any water quality violations?

The EPA has 1 violation on file for Wilson Town Water District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.