Compliance record
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 9600 µg/L 96% of the EPA limit 10000 µg/L | 646/898 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 9600 µg/L 96% of the EPA limit 10000 µg/L | 152/233 | SYR4 | 2012–2019 |
| Barium | 56 µg/L 2.8% of the EPA limit 2000 µg/L | 44/46 | SYR4 | 2012–2019 |
| Copper | 350 µg/L 27% of the EPA limit 1300 µg/L | 19/46 | SYR4 | 2012–2019 |
| Lead | 0.0021 mg/L 14% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| Combined Uranium | 2.72 µg/L 9.1% of the EPA limit 30 µg/L | 11/14 | SYR4 | 2012–2017 |
| Combined Radium (-226 And -228) | 2.7925 pCi/L 56% of the EPA limit 5 pCi/L | 7/20 | SYR4 | 2012–2018 |
| Bromodichloromethane | 3 µg/L No EPA limit set | 6/11 | SYR4 | 2014–2019 |
| Fluoride | 160 µg/L 4% of the EPA limit 4000 µg/L | 5/48 | SYR4 | 2012–2019 |
| Bromoform | 3.12 µg/L No EPA limit set | 4/11 | SYR4 | 2014–2019 |
| Chloroform | 2.4 µg/L No EPA limit set | 4/11 | SYR4 | 2014–2019 |
| Dibromochloromethane | 4 µg/L No EPA limit set | 4/11 | SYR4 | 2014–2019 |
| Gross Beta Particle Activity | 2.66 pCi/L No EPA limit set | 4/9 | SYR4 | 2016–2018 |
| Lead | 2.82 µg/L 19% of the EPA limit 15 µg/L | 4/47 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.3 µg/L No EPA limit set | 3/11 | SYR4 | 2014–2019 |
| TTHM | 11.3 µg/L 14% of the EPA limit 80 µg/L | 3/5 | SYR4 | 2017–2019 |
| Total Haloacetic Acids (HAA5) | 2.3 µg/L 3.8% of the EPA limit 60 µg/L | 2/5 | SYR4 | 2017–2019 |
65 contaminants tested, none detected
Utility contact
Frequently asked questions about Sands Point
Is Sands Point tap water safe to drink?
EPA monitoring detected 17 contaminants in Sands Point's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Sands Point's water?
EPA monitoring detected Nitrate, Nitrate-Nitrite, Barium, Copper, Lead, and others. The full list with the level and data source for each is above.
How many people does Sands Point serve?
Sands Point reports serving 2,900 people in New York, per its EPA record.
Has Sands Point had any water quality violations?
The EPA has no formal drinking-water violations on file for Sands Point.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.