Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 2009-01-01 → 2014-12-31 |
| MR | Monitoring | Archived | 2009-01-01 → 2014-12-31 |
| MR | Monitoring | Archived | 2009-01-01 → 2014-12-31 |
| MR | Monitoring | Archived | 2009-01-01 → 2014-12-31 |
| MR | Monitoring | Archived | 2009-01-01 → 2014-12-31 |
| MR | Monitoring | Archived | 2009-01-01 → 2014-12-31 |
| MR | Monitoring | Archived | 2009-01-01 → 2014-12-31 |
| MR | Monitoring | Archived | 2009-01-01 → 2014-12-31 |
| MR | Monitoring | Resolved | 2008-04-01 → 2008-06-30 |
| MR | Monitoring | Resolved | 2008-04-01 → 2008-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0017 mg/L 11% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Nitrate | 1490 µg/L 15% of the EPA limit 10000 µg/L | 14/14 | SYR4 | 2012–2019 |
| Barium | 69 µg/L 3.5% of the EPA limit 2000 µg/L | 4/4 | SYR4 | 2013–2017 |
| Fluoride | 400 µg/L 10% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2013–2017 |
| Bromodichloromethane | 2.1 µg/L No EPA limit set | 2/2 | SYR4 | 2014–2017 |
| Bromoform | 49.9 µg/L No EPA limit set | 2/2 | SYR4 | 2014–2017 |
| Chloroform | 0.6000 µg/L No EPA limit set | 2/2 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 12.3 µg/L No EPA limit set | 2/2 | SYR4 | 2014–2017 |
| Dibromochloromethane | 9.3 µg/L No EPA limit set | 2/2 | SYR4 | 2014–2017 |
| TTHM | 61 µg/L 76% of the EPA limit 80 µg/L | 2/2 | SYR4 | 2014–2017 |
| Total Haloacetic Acids (HAA5) | 12.3 µg/L 21% of the EPA limit 60 µg/L | 2/2 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 0.6960 pCi/L 14% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Nitrate-Nitrite | 2980 µg/L 30% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2013 |
| Nitrite | 1490 µg/L 149% of the EPA limit, in the worst sample — 1000 µg/L | 1/1 | SYR4 | 2013 |
| Selenium | 3.1 µg/L 6.2% of the EPA limit 50 µg/L | 1/4 | SYR4 | 2013–2017 |
| Trichloroacetic Acid | 1 µg/L No EPA limit set | 1/2 | SYR4 | 2014–2017 |
56 contaminants tested, none detected
Utility contact
Frequently asked questions about Glenfield Water District
Is Glenfield Water District tap water safe to drink?
EPA monitoring detected 16 contaminants in Glenfield Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Glenfield Water District's water?
EPA monitoring detected Lead, Nitrate, Barium, Fluoride, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Glenfield Water District serve?
Glenfield Water District reports serving 300 people in New York, per its EPA record.
Has Glenfield Water District had any water quality violations?
The EPA has 29 violations on file for Glenfield Water District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.