Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 2021-01-01 → 2021-12-31 |
| MR | Monitoring | Archived | 2021-01-01 → 2021-12-31 |
| MR | Monitoring | Archived | 2021-01-01 → 2021-12-31 |
| MR | Monitoring | Archived | 2021-01-01 → 2021-12-31 |
| MR | Monitoring | Resolved | 2016-01-01 → 2016-12-31 |
| MR | Monitoring | Resolved | 2016-01-01 → 2016-12-31 |
| MR | Monitoring | Resolved | 2016-01-01 → 2016-12-31 |
| MR | Monitoring | Resolved | 2016-01-01 → 2016-12-31 |
| MR | Monitoring | Resolved | 2016-01-01 → 2016-12-31 |
| MR | Monitoring | Resolved | 2016-01-01 → 2016-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 4600 µg/L 46% of the EPA limit 10000 µg/L | 30/30 | SYR4 | 2012–2019 |
| Bromodichloromethane | 4.4 µg/L No EPA limit set | 12/12 | SYR4 | 2014–2019 |
| Chloroform | 32.5 µg/L No EPA limit set | 12/12 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 7 µg/L No EPA limit set | 12/12 | SYR4 | 2014–2019 |
| TTHM | 34.6 µg/L 43% of the EPA limit 80 µg/L | 12/12 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 11 µg/L 18% of the EPA limit 60 µg/L | 12/12 | SYR4 | 2014–2019 |
| Dibromochloromethane | 6.3 µg/L No EPA limit set | 11/12 | SYR4 | 2014–2019 |
| Lead | 0.0043 mg/L 29% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2023 |
| Trichloroacetic Acid | 3 µg/L No EPA limit set | 9/12 | SYR4 | 2014–2019 |
| Barium | 82.7 µg/L 4.1% of the EPA limit 2000 µg/L | 5/5 | SYR4 | 2012–2018 |
| Fluoride | 1100 µg/L 28% of the EPA limit 4000 µg/L | 5/5 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 4.1 µg/L No EPA limit set | 5/12 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 4.4 µg/L No EPA limit set | 4/12 | SYR4 | 2014–2019 |
| Bromoform | 11.4 µg/L No EPA limit set | 3/12 | SYR4 | 2014–2019 |
| Combined Radium (-226 And -228) | 0.3500 pCi/L 7% of the EPA limit 5 pCi/L | 2/2 | SYR4 | 2016 |
| Monobromoacetic Acid | 3 µg/L No EPA limit set | 2/12 | SYR4 | 2014–2019 |
| Asbestos | 4.27 MFL 61% of the EPA limit 7 MFL | 1/1 | SYR4 | 2013 |
| Chromium | 1.4 µg/L 1.4% of the EPA limit 100 µg/L | 1/5 | SYR4 | 2012–2018 |
53 contaminants tested, none detected
Utility contact
Frequently asked questions about Adams Village
Is Adams Village tap water safe to drink?
EPA monitoring detected 18 contaminants in Adams Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Adams Village's water?
EPA monitoring detected Nitrate, Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Adams Village serve?
Adams Village reports serving 2,000 people in New York, per its EPA record.
Has Adams Village had any water quality violations?
The EPA has 19 violations on file for Adams Village, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.