Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 117 µg/L No EPA limit set
worst single sample: 170 µg/L | 31/31 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 15.5 µg/L No EPA limit set
worst single sample: 20 µg/L | 31/31 | SYR4 | 2012–2019 |
| TTHM | 122.75 µg/L 153% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 174 µg/L | 30/30 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 64.605 µg/L 108% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 148 µg/L | 30/30 | SYR4 | 2012–2019 |
| Bromodichloromethane | 5.84 µg/L No EPA limit set
worst single sample: 7.51 µg/L | 29/31 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 55.74 µg/L No EPA limit set
worst single sample: 140 µg/L | 27/31 | SYR4 | 2012–2019 |
| Nitrate | 2900 µg/L 29% of the EPA limit 10000 µg/L | 16/18 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2025 |
| Barium | 10 µg/L 0.5% of the EPA limit 2000 µg/L | 6/7 | SYR4 | 2012–2019 |
| Fluoride | 231.89 µg/L 5.8% of the EPA limit 4000 µg/L
worst single sample: 250 µg/L | 3/7 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.76 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 2/31 | SYR4 | 2012–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Blue Mt Lake Wd
Is Blue Mt Lake Wd tap water safe to drink?
EPA monitoring detected 11 contaminants in Blue Mt Lake Wd's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Blue Mt Lake Wd's water?
EPA monitoring detected Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Blue Mt Lake Wd serve?
Blue Mt Lake Wd reports serving 400 people in New York, per its EPA record.
Has Blue Mt Lake Wd had any water quality violations?
The EPA has 318 violations on file for Blue Mt Lake Wd, of which 212 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.