Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 4330 µg/L 43% of the EPA limit 10000 µg/L | 32/32 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 4330 µg/L 43% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0021 mg/L 14% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2023 |
| Barium | 142 µg/L 7.1% of the EPA limit 2000 µg/L | 6/6 | SYR4 | 2012–2018 |
| Bromodichloromethane | 1.31 µg/L No EPA limit set | 2/3 | SYR4 | 2013–2019 |
| Chloroform | 1.2 µg/L No EPA limit set | 2/3 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.19 µg/L No EPA limit set | 2/3 | SYR4 | 2013–2019 |
| Lead | 16.5 µg/L 110% of the EPA limit, in the worst sample — 15 µg/L | 2/3 | SYR4 | 2018 |
| TTHM | 3.7 µg/L 4.6% of the EPA limit 80 µg/L | 2/3 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 0.6900 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.8 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 2.5 µg/L 4.2% of the EPA limit 60 µg/L | 1/3 | SYR4 | 2013–2019 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about Scott Water District No. 1
Is Scott Water District No. 1 tap water safe to drink?
EPA monitoring detected 12 contaminants in Scott Water District No. 1's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Scott Water District No. 1's water?
EPA monitoring detected Nitrate, Nitrate-Nitrite, Lead, Barium, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Scott Water District No. 1 serve?
Scott Water District No. 1 reports serving 154 people in New York, per its EPA record.
Has Scott Water District No. 1 had any water quality violations?
The EPA has 171 violations on file for Scott Water District No. 1, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.