Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-03-31 |
| MCL | Health-based | Resolved | 2012-01-01 → 2012-03-31 |
| MCL | Health-based | Resolved | 2012-01-01 → 2012-03-31 |
| MCL | Health-based | Resolved | 2012-01-01 → 2012-03-31 |
| MCL | Health-based | Resolved | 2012-01-01 → 2012-03-31 |
| MCL | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Barium | 6500 µg/L 325% of the EPA limit, in the worst sample — 2000 µg/L | 35/35 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2024 |
| Bromodichloromethane | 1.77 µg/L No EPA limit set | 3/3 | SYR4 | 2013–2017 |
| Chloroform | 4.84 µg/L No EPA limit set | 3/3 | SYR4 | 2013–2017 |
| Dibromochloromethane | 1.7 µg/L No EPA limit set | 3/3 | SYR4 | 2013–2017 |
| Dibromoacetic Acid | 1.64 µg/L No EPA limit set | 2/2 | SYR4 | 2013–2017 |
| Nitrate | 61 µg/L 0.6% of the EPA limit 10000 µg/L | 2/14 | SYR4 | 2012–2018 |
| Arsenic | 1.8 µg/L 18% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2013–2019 |
| Bromoform | 0.9000 µg/L No EPA limit set | 1/2 | SYR4 | 2013–2017 |
| Chromium | 1.5 µg/L 1.5% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2013–2019 |
| Combined Uranium | 1.36 µg/L 4.5% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2013 |
| Lead | 1.1 µg/L 7.3% of the EPA limit 15 µg/L | 1/3 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 61 µg/L 0.6% of the EPA limit 10000 µg/L | 1/6 | SYR4 | 2012–2018 |
| TTHM | 3.6 µg/L 4.5% of the EPA limit 80 µg/L | 1/1 | SYR4 | 2017 |
| Total Haloacetic Acids (HAA5) | 0.7460 µg/L 1.2% of the EPA limit 60 µg/L | 1/1 | SYR4 | 2017 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Westover Hills Mhp
Is Westover Hills Mhp tap water safe to drink?
EPA monitoring detected 15 contaminants in Westover Hills Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Westover Hills Mhp's water?
EPA monitoring detected Barium, Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Westover Hills Mhp serve?
Westover Hills Mhp reports serving 200 people in New York, per its EPA record.
Has Westover Hills Mhp had any water quality violations?
The EPA has 104 violations on file for Westover Hills Mhp, of which 30 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.