Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2014-08-01 → 2014-08-31 |
| MCL | Health-based | Resolved | 2014-08-01 → 2014-08-31 |
| MCL | Health-based | Resolved | 2014-08-01 → 2014-08-31 |
| MCL | Health-based | Resolved | 1996-01-01 → 1996-12-31 |
| MCL | Health-based | Resolved | 1995-01-01 → 1995-12-31 |
| MCL | Health-based | Resolved | 1995-01-01 → 1995-12-31 |
| MCL | Health-based | Resolved | 1995-01-01 → 1995-12-31 |
| MCL | Health-based | Resolved | 1995-01-01 → 1995-12-31 |
| Other | Monitoring | Resolved | 2025-07-01 |
| Other | Monitoring | Resolved | 2025-07-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 352 µg/L 27% of the EPA limit 1300 µg/L
worst single sample: 783 µg/L | 86/86 | SYR4 | 2012–2018 |
| Chloroform | 3.052 µg/L No EPA limit set
worst single sample: 175 µg/L | 83/111 | SYR4 | 2012–2019 |
| Lead | 6.63 µg/L 44% of the EPA limit 15 µg/L
worst single sample: 11.5 µg/L | 80/80 | SYR4 | 2012–2017 |
| Dibromochloromethane | 3.056 µg/L No EPA limit set
worst single sample: 8.54 µg/L | 69/111 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.13 µg/L No EPA limit set
worst single sample: 4.24 µg/L | 68/111 | SYR4 | 2012–2019 |
| Bromoform | 2.52 µg/L No EPA limit set
worst single sample: 4.62 µg/L | 41/111 | SYR4 | 2012–2019 |
| Nitrate | 2612 µg/L 26% of the EPA limit 10000 µg/L
worst single sample: 2700 µg/L | 32/32 | SYR4 | 2012–2019 |
| Lead | 0.0042 mg/L 28% of the EPA limit 0.0150 mg/L | 26/26 | LCR | 2023 |
| TTHM | 11.4325 µg/L 14% of the EPA limit 80 µg/L
worst single sample: 13.33 µg/L | 16/16 | SYR4 | 2012–2019 |
| Arsenic | 1.5625 µg/L 16% of the EPA limit 10 µg/L
worst single sample: 1.8 µg/L | 6/6 | SYR4 | 2012–2018 |
| Barium | 77.25 µg/L 3.9% of the EPA limit 2000 µg/L
worst single sample: 79.2 µg/L | 6/6 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 2.17 µg/L No EPA limit set
worst single sample: 2.47 µg/L | 6/16 | SYR4 | 2012–2019 |
| Selenium | 2.425 µg/L 4.9% of the EPA limit 50 µg/L
worst single sample: 2.5 µg/L | 6/6 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 4.775 µg/L 8% of the EPA limit 60 µg/L
worst single sample: 5.5 µg/L | 6/16 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 4/4 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 1.719 µg/L No EPA limit set
worst single sample: 1.74 µg/L | 4/16 | SYR4 | 2012–2019 |
| Chromium | 3.74 µg/L 3.7% of the EPA limit 100 µg/L
worst single sample: 3.9 µg/L | 3/6 | SYR4 | 2012–2018 |
| Mercury | 0.0579 µg/L 2.9% of the EPA limit 2 µg/L
worst single sample: 0.0580 µg/L | 3/6 | SYR4 | 2012–2018 |
| Thallium, Total | 0.0680 µg/L 3.4% of the EPA limit 2 µg/L
worst single sample: 0.0700 µg/L | 2/6 | SYR4 | 2012–2018 |
| 1,1,1-Trichloroethane | 6.94 µg/L 3.5% of the EPA limit 200 µg/L | 1/95 | SYR4 | 2012–2019 |
| Benzene | 0.0900 µg/L 1.8% of the EPA limit 5 µg/L | 1/95 | SYR4 | 2012–2019 |
| Cadmium | 0.0200 µg/L 0.4% of the EPA limit 5 µg/L | 1/6 | SYR4 | 2012–2018 |
| Carbon Tetrachloride | 0.3100 µg/L 6.2% of the EPA limit 5 µg/L | 1/95 | SYR4 | 2012–2019 |
| Ethylbenzene | 0.1300 µg/L 0% of the EPA limit 700 µg/L | 1/95 | SYR4 | 2012–2019 |
| Fluoride | 270 µg/L 6.8% of the EPA limit 4000 µg/L | 1/12 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 0.5700 µg/L No EPA limit set | 1/16 | SYR4 | 2012–2019 |
| Toluene | 0.1800 µg/L 0% of the EPA limit 1000 µg/L | 1/95 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 0.7200 µg/L No EPA limit set | 1/16 | SYR4 | 2012–2019 |
| Xylenes, Total | 0.3600 µg/L 0% of the EPA limit 10000 µg/L | 1/95 | SYR4 | 2012–2019 |
65 contaminants tested, none detected
Utility contact
Frequently asked questions about High Bridge W Dept
Is High Bridge W Dept tap water safe to drink?
EPA monitoring detected 32 contaminants in High Bridge W Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in High Bridge W Dept's water?
EPA monitoring detected Copper, Chloroform, Lead, Dibromochloromethane, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does High Bridge W Dept serve?
High Bridge W Dept reports serving 3,300 people in New Jersey, per its EPA record.
Has High Bridge W Dept had any water quality violations?
The EPA has 139 violations on file for High Bridge W Dept, of which 8 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.