Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Archived | 2025-07-01 → 2025-12-31 |
| TT | Health-based | Archived | 2025-07-01 → 2025-12-31 |
| MCL | Health-based | Resolved | 2014-04-01 → 2014-06-30 |
| MCL | Health-based | Resolved | 2014-04-01 → 2014-06-30 |
| MCL | Health-based | Resolved | 2014-04-01 → 2014-06-30 |
| MCL | Health-based | Resolved | 2013-07-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-07-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-07-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-07-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2012-12-01 → 2012-12-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Dibromochloromethane | 21.2 µg/L No EPA limit set | 57/73 | SYR4 | 2012–2019 |
| Bromodichloromethane | 16.4 µg/L No EPA limit set | 55/73 | SYR4 | 2012–2019 |
| Chloroform | 7.49 µg/L No EPA limit set | 54/73 | SYR4 | 2012–2019 |
| Copper | 476 µg/L 37% of the EPA limit 1300 µg/L | 53/55 | SYR4 | 2012–2018 |
| Bromoform | 14.4 µg/L No EPA limit set | 51/73 | SYR4 | 2012–2019 |
| Lead | 31.5 µg/L 210% of the EPA limit, in the worst sample — 15 µg/L | 44/47 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 8.6 pCi/L 172% of the EPA limit, in the worst sample — 5 pCi/L | 30/35 | SYR4 | 2012–2019 |
| Lead | 0.0028 mg/L 19% of the EPA limit 0.0150 mg/L | 22/22 | LCR | 2023 |
| TTHM | 55.7 µg/L 70% of the EPA limit 80 µg/L | 16/16 | SYR4 | 2012–2019 |
| Tetrachloroethylene | 0.5500 µg/L 11% of the EPA limit 5 µg/L | 12/57 | SYR4 | 2012–2019 |
| Trichloroethylene | 1.06 µg/L 21% of the EPA limit 5 µg/L | 12/57 | SYR4 | 2012–2019 |
| 1,2-Dichloroethane | 0.5600 µg/L 11% of the EPA limit 5 µg/L | 11/57 | SYR4 | 2012–2019 |
| 1,2-Dichloropropane | 0.3500 µg/L 7% of the EPA limit 5 µg/L | 11/57 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 8.68 µg/L 14% of the EPA limit 60 µg/L | 10/16 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 4.69 µg/L No EPA limit set | 9/16 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 2.56 µg/L No EPA limit set | 7/16 | SYR4 | 2012–2019 |
| Nitrate | 100 µg/L 1% of the EPA limit 10000 µg/L | 6/30 | SYR4 | 2012–2019 |
| Arsenic | 3.7 µg/L 37% of the EPA limit 10 µg/L | 5/5 | SYR4 | 2012–2018 |
| Barium | 103 µg/L 5.1% of the EPA limit 2000 µg/L | 5/5 | SYR4 | 2012–2018 |
| Trichloroacetic Acid | 1.26 µg/L No EPA limit set | 5/16 | SYR4 | 2012–2019 |
| Selenium | 11.3 µg/L 23% of the EPA limit 50 µg/L | 4/5 | SYR4 | 2012–2018 |
| cis-1,2-Dichloroethylene | 0.1300 µg/L 0.2% of the EPA limit 70 µg/L | 4/57 | SYR4 | 2012–2019 |
| Beryllium, Total | 0.0900 µg/L 2.3% of the EPA limit 4 µg/L | 3/5 | SYR4 | 2012–2018 |
| Lithium | 19.7 µg/L No EPA limit set | 3/4 | UCMR-5 | 2025 |
| Benzene | 0.1000 µg/L 2% of the EPA limit 5 µg/L | 2/57 | SYR4 | 2012–2019 |
| Chromium | 1.8 µg/L 1.8% of the EPA limit 100 µg/L | 2/5 | SYR4 | 2012–2018 |
| Antimony, Total | 0.0700 µg/L 1.2% of the EPA limit 6 µg/L | 1/5 | SYR4 | 2012–2018 |
| Dichloromethane | 0.6800 µg/L 14% of the EPA limit 5 µg/L | 1/57 | SYR4 | 2012–2019 |
| Fluoride | 260 µg/L 6.5% of the EPA limit 4000 µg/L | 1/10 | SYR4 | 2012–2018 |
| Gross Alpha, Excl. Radon And U | 37.29 pCi/L 249% of the EPA limit, in the worst sample — 15 pCi/L | 1/1 | SYR4 | 2013 |
| Mercury | 0.0350 µg/L 1.8% of the EPA limit 2 µg/L | 1/4 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 0.8600 µg/L No EPA limit set | 1/16 | SYR4 | 2012–2019 |
49 contaminants tested, none detected
Utility contact
Frequently asked questions about Paulsboro Water Department
Is Paulsboro Water Department tap water safe to drink?
EPA monitoring detected 34 contaminants in Paulsboro Water Department's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Paulsboro Water Department's water?
EPA monitoring detected Dibromochloromethane, Bromodichloromethane, Chloroform, Copper, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Paulsboro Water Department serve?
Paulsboro Water Department reports serving 6,097 people in New Jersey, per its EPA record.
Has Paulsboro Water Department had any water quality violations?
The EPA has 181 violations on file for Paulsboro Water Department, of which 23 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.