Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-09-01 → 2010-09-30 |
| MR | Monitoring | Resolved | 2025-10-01 |
| MR | Monitoring | Resolved | 2025-10-01 |
| Other | Monitoring | Unaddressed | 2024-09-01 |
| MR | Monitoring | Resolved | 2019-04-01 → 2019-06-30 |
| MR | Monitoring | Resolved | 2019-04-01 → 2019-06-30 |
| MR | Monitoring | Resolved | 2019-04-01 → 2019-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 24.1 µg/L No EPA limit set | 33/34 | SYR4 | 2012–2019 |
| TTHM | 28.6 µg/L 36% of the EPA limit 80 µg/L | 32/32 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.8 µg/L No EPA limit set | 28/28 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 9 µg/L 15% of the EPA limit 60 µg/L | 28/28 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.8 µg/L No EPA limit set | 27/34 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 4.2 µg/L No EPA limit set | 26/28 | SYR4 | 2012–2019 |
| Lead | 0.00066 mg/L 4.4% of the EPA limit 0.0150 mg/L | 24/24 | LCR | 2025 |
| Copper | 92.5 µg/L 7.1% of the EPA limit 1300 µg/L | 17/17 | SYR4 | 2013–2019 |
| Dibromochloromethane | 0.6800 µg/L No EPA limit set | 17/34 | SYR4 | 2012–2019 |
| Lead | 2.8 µg/L 19% of the EPA limit 15 µg/L | 14/15 | SYR4 | 2013–2019 |
| Fluoride | 630 µg/L 16% of the EPA limit 4000 µg/L | 5/5 | SYR4 | 2012–2018 |
| Barium | 14.3 µg/L 0.7% of the EPA limit 2000 µg/L | 2/3 | SYR4 | 2012–2018 |
| Nitrate | 102 µg/L 1% of the EPA limit 10000 µg/L | 2/16 | SYR4 | 2012–2019 |
| Chromium | 0.5200 µg/L 0.5% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2012–2018 |
| Mercury | 0.0710 µg/L 3.6% of the EPA limit 2 µg/L | 1/3 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 1.1 µg/L No EPA limit set | 1/28 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 0.5400 µg/L No EPA limit set | 1/28 | SYR4 | 2012–2019 |
| Selenium | 0.1400 µg/L 0.3% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2018 |
34 contaminants tested, none detected
Utility contact
Frequently asked questions about Winslow Twp Dmu
Is Winslow Twp Dmu tap water safe to drink?
EPA monitoring detected 18 contaminants in Winslow Twp Dmu's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Winslow Twp Dmu's water?
EPA monitoring detected Chloroform, TTHM, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Winslow Twp Dmu serve?
Winslow Twp Dmu reports serving 172 people in New Jersey, per its EPA record.
Has Winslow Twp Dmu had any water quality violations?
The EPA has 85 violations on file for Winslow Twp Dmu, of which 4 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.