Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2024-07-11 |
| MR | Monitoring | Resolved | 2024-07-11 |
| RPT | Monitoring | Resolved | 2020-05-11 |
| RPT | Monitoring | Resolved | 2020-05-11 |
| MR | Monitoring | Resolved | 2020-04-01 → 2020-06-30 |
| MR | Monitoring | Resolved | 2020-04-01 → 2020-06-30 |
| MR | Monitoring | Resolved | 2020-04-01 → 2020-06-30 |
| MON | Monitoring | Resolved | 2020-04-01 → 2020-04-30 |
| MON | Monitoring | Resolved | 2020-04-01 → 2020-04-30 |
| MON | Monitoring | Resolved | 2020-04-01 → 2020-04-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 700 µg/L 54% of the EPA limit 1300 µg/L | 67/69 | SYR4 | 2012–2019 |
| Lead | 9.13 µg/L 61% of the EPA limit 15 µg/L | 39/63 | SYR4 | 2012–2019 |
| Chloroform | 5.7 µg/L No EPA limit set | 20/26 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.71 µg/L No EPA limit set | 19/26 | SYR4 | 2012–2019 |
| Lead | 0.0019 mg/L 12% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2025 |
| TTHM | 7 µg/L 8.8% of the EPA limit 80 µg/L | 14/18 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 7.55 µg/L No EPA limit set | 13/20 | SYR4 | 2012–2019 |
| Fluoride | 760 µg/L 19% of the EPA limit 4000 µg/L | 13/15 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 11.4 µg/L 19% of the EPA limit 60 µg/L | 13/20 | SYR4 | 2012–2019 |
| Barium | 81.9 µg/L 4.1% of the EPA limit 2000 µg/L | 8/9 | SYR4 | 2012–2018 |
| Dibromochloromethane | 0.6000 µg/L No EPA limit set | 7/26 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 5.2 µg/L No EPA limit set | 7/20 | SYR4 | 2012–2019 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 5/9 | SYR4 | 2012–2018 |
| Selenium | 5 µg/L 10% of the EPA limit 50 µg/L | 5/9 | SYR4 | 2012–2018 |
| Cadmium | 1 µg/L 20% of the EPA limit 5 µg/L | 4/9 | SYR4 | 2012–2018 |
| Combined Radium (-226 And -228) | 3.6 pCi/L 72% of the EPA limit 5 pCi/L | 4/4 | SYR4 | 2015–2018 |
| Mercury | 0.2000 µg/L 10% of the EPA limit 2 µg/L | 4/9 | SYR4 | 2012–2018 |
| Cyanide | 11 µg/L 5.5% of the EPA limit 200 µg/L | 3/9 | SYR4 | 2012–2018 |
| Antimony, Total | 5 µg/L 83% of the EPA limit 6 µg/L | 2/9 | SYR4 | 2012–2018 |
| Chromium | 3.1 µg/L 3.1% of the EPA limit 100 µg/L | 2/9 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 0.7000 µg/L No EPA limit set | 2/20 | SYR4 | 2012–2019 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Clementon Water Department
Is Clementon Water Department tap water safe to drink?
EPA monitoring detected 21 contaminants in Clementon Water Department's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Clementon Water Department's water?
EPA monitoring detected Copper, Lead, Chloroform, Bromodichloromethane, Lead, and others. The full list with the level and data source for each is above.
How many people does Clementon Water Department serve?
Clementon Water Department reports serving 5,000 people in New Jersey, per its EPA record.
Has Clementon Water Department had any water quality violations?
The EPA has 398 violations on file for Clementon Water Department, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.